MZ is back!HEADmain

20 files changed, 3005 insertions, 0 deletions

diff --git a/v4.0/src/H/BASEMID.H b/v4.0/src/H/BASEMID.H
new file mode 100644
index 0000000..4f0c989
--- /dev/null
+++ b/v4.0/src/H/BASEMID.H
@@ -0,0 +1,246 @@
+/*      SCCSID = @(#)basemid.h  8.26 87/05/21 */
+
+#define MSG_RESPONSE_DATA               0         /* data for valid responses (Y N A R I) */
+#define MSG_INVALID_FUNCTION            1         /* Invalid function */
+#define MSG_FILE_NOT_FOUND              2         /* File not found */
+#define MSG_PATH_NOT_FOUND              3         /* Path not found */
+#define MSG_OUT_OF_HANDLES              4         /* Too many open files, no handles left */
+#define MSG_ACCESS_DENIED               5         /* Access denied */
+#define MSG_INVALID_HANDLE              6         /* Invalid handle */
+#define MSG_MEMORY_BLOCKS_BAD           7         /* Memory control blocks destroyed */
+#define MSG_NO_MEMORY                   8         /* Insufficient memory */
+#define MSG_INVALID_MEM_ADDR            9         /* Invalid memory block address */
+#define MSG_INVALID_ENVIRON             10        /* Invalid environment */
+#define MSG_INVALID_FORMAT              11        /* Invalid format */
+#define MSG_INVALID_ACC_CODE            12        /* Invalid access code */
+#define MSG_INVALID_DATA                13        /* Invalid data */
+#define MSG_14                          14        /* Reserved */
+#define MSG_INVALID_DRIVE               15        /* Invalid drive */
+#define MSG_ATT_RD_CURDIR               16        /* Attempt to remove current directory */
+#define MSG_NOT_SAME_DEVICE             17        /* Not same device */
+#define MSG_NO_MORE_FILES               18        /* No more files */
+#define MSG_ATT_WRITE_PROT              19        /* Attempted write on protected disk */
+#define MSG_UNKNOWN_UNIT                20        /* Unknown unit */
+#define MSG_DRIVE_NOT_READY             21        /* Drive not ready */
+#define MSG_UNKNOWN_COMMAND             22        /* Unknown command */
+#define MSG_DATA_ERROR                  23        /* Data error (CRC) */
+#define MSG_BAD_REQ_STRUCTURE           24        /* Bad request structure length */
+#define MSG_SEEK_ERROR                  25        /* Seek error */
+#define MSG_UNKNOWN_MEDIA               26        /* Unknown media type */
+#define MSG_SECTOR_NOT_FOUND            27        /* Sector not found */
+#define MSG_OUT_OF_PAPER                28        /* Printer out of paper */
+#define MSG_WRITE_FAULT                 29        /* Write fault */
+#define MSG_READ_FAULT                  30        /* Read fault */
+#define MSG_GENERAL_FAILURE             31        /* General failure */
+#define MSG_SHARING_VIOLATION           32        /* Sharing violation */
+#define MSG_SHAR_VIOLAT_FIND            32        /* sharing violation find */
+#define MSG_LOCK_VIOLATION              33        /* Lock violation */
+#define MSG_INVALID_DISK_CHANGE         34        /* Invalid disk change */
+#define MSG_35                          35        /* FCB unavailable */
+#define MSG_SHARING_BUFF_OFLOW          36        /* Sharing buffer overflow */
+/* msg 37 - 49 reserved */
+#define MSG_NET_REQ_NOT_SUPPORT         50        /* net request not supported */
+#define MSG_NET_REMOTE_NOT_ONLINE       51        /* remote computer not online */
+#define MSG_NET_DUP_FILENAME            52        /* duplicate filename on network */
+#define MSG_NET_PATH_NOT_FOUND          53        /* network path not found */
+#define MSG_NET_BUSY                    54        /* network is busy */
+#define MSG_NET_DEV_NOT_INSTALLED       55        /* device no longer installed */
+#define MSG_NET_BIOS_LIMIT_REACHED      56        /* BIOS command limit exceeded */
+#define MSG_NET_ADAPT_HRDW_ERROR        57        /* adapter hardware error */
+#define MSG_NET_INCORRECT_RESPONSE      58        /* network response incorrect */
+#define MSG_NET_UNEXPECT_ERROR          59        /* unexpected network error */
+#define MSG_NET_REMOT_ADPT_INCOMP       60        /* remote adapter is incompatible */
+#define MSG_NET_PRINT_Q_FULL            61        /* print queue is full */
+#define MSG_NET_NO_SPACE_TO_PRINT_FL    62        /* not enough space to print file */
+#define MSG_NET_PRINT_FILE_DELETED      63        /* print file was deleted */
+#define MSG_NET_NAME_DELETED            64        /* network name was deleted */
+#define MSG_NET_ACCESS_DENIED           65        /* network access denied */
+#define MSG_NET_DEV_TYPE_INVALID        66        /* network device type invalid */
+#define MSG_NET_NAME_NOT_FOUND          67        /* network name cannot be found */
+#define MSG_NET_NAME_LIMIT_EXCEED       68        /* net name limit was exceeded */
+#define MSG_NET_BIOS_LIMIT_EXCEED       69        /* BIOS session limit exceeded */
+#define MSG_NET_TEMP_PAUSED             70        /* net is temporarily paused */
+#define MSG_NET_REQUEST_DENIED          71        /* net request was denied */
+#define MSG_NET_PRT_DSK_REDIR_PAUSE     72        /* print or disk redirection paused */
+/* msg 73 - 79 reserved */
+#define MSG_FILE_EXISTS                 80
+/* msg 81 reserved */
+#define MSG_CANNOT_MAKE                 82
+#define MSG_NET_FAIL_INT_TWO_FOUR       83        /* fail on int 24 */
+#define MSG_NET_TOO_MANY_REDIRECT       84        /* too many net redirections */
+#define MSG_NET_DUP_REDIRECTION         85        /* duplicate redirection */
+#define MSG_NET_INVALID_PASSWORD        86        /* invalid password */
+#define MSG_NET_INCORR_PARAMETER        87        /* incorrect net parameter */
+#define MSG_NET_DATA_FAULT              88        /* net data fault */
+#define MSG_NO_PROC_SLOTS               89        /* no process slots */
+#define MSG_DISK_CHANGE                 107
+#define MSG_DRIVE_LOCKED                108
+#define MSG_ERROR_OPEN_FAILED           110       /* error open failed */
+#define MSG_DISK_FULL                   112
+#define MSG_NO_SEARCH_HANDLES           113
+#define MSG_ERR_INV_TAR_HANDLE          114       /* error invalid target handle */
+#define MSG_BAD_DRIVER_LEVEL            119       /* bad driver level */
+#define MSG_INVALID_NAME                123
+#define MSG_NO_VOLUME_LABEL             125
+/* */
+#define MSG_JOIN_ON_DRIV_IS_TAR         133       /* directory on drive is target of a jo */
+#define MSG_JOIN_DRIVE_IS               134       /* drive is joined */
+#define MSG_SUB_DRIVE_IS                135       /* drive is substed */
+#define MSG_DRIVE_IS_NOT_JOINED         136       /* drive is not joined */
+#define MSG_DRIVE_NOT_SUBSTED           137       /* drive is not substituted - subst */
+#define MSG_JOIN_CANNOT_JOIN_DRIVE      138       /* cannot join to a joined drive */
+#define MSG_SUB_CANNOT_SUBST_DRIVE      139       /* cannot sub to sub drive */
+#define MSG_JOIN_CANNOT_SUB_DRIVE       140       /* cannot join to a substed drive */
+#define MSG_SUB_CANNOT_JOIN_DRIVE       141       /* cannot sub to a joined drive */
+#define MSG_DRIVE_IS_BUSY               142       /* drive is busy - join */
+#define MSG_JOIN_SUB_SAME_DRIVE         143       /* cannot join or subst a drive to dir */
+#define MSG_DIRECT_IS_NOT_SUBDIR        144       /* directory is not subdirectory of root */
+#define MSG_DIRECT_IS_NOT_EMPTY         145       /* directory is not empty  -join */
+#define MSG_PATH_USED_SUBST_JOIN        146       /* path used in subst, join - join sub */
+/*  147 not used */
+#define MSG_PATH_BUSY                   148       /* path is busy - join */
+#define MSG_SUB_ON_DRIVE_IS_JOIN        149       /* directory on drive is target of a st */
+/* */
+#define MSG_VOLUME_TOO_LONG             154
+/* */
+#define MSG_INVALID_ORDINAL             182       /* invalid ordinal */
+#define MSG_INVALID_STARTING_CODESEG    188       /* invalid code seg */
+/* */
+#define MSG_INVALID_STACKSEG            189       /* invalid stack segment */
+#define MSG_INVALID_MODULETYPE          190       /* invalid module type */
+#define MSG_INVALID_EXE_SIGNATURE       191       /* Invalid signature */
+#define MSG_EXE_MARKED_INVALID          192       /* Invalid exec file */
+#define MSG_BAD_EXE_FORMAT              193       /* Bad or old exec file */
+#define MSG_ITERATED_DATA_EXCEEDS_64K   194       /* iterated data exceeds 64k */
+#define MSG_INVALID_MINALLOCSIZE        195       /* data segment has invalid size */
+#define MSG_DYNLINK_FROM_INVALID_RING   196       /* invalid ring */
+#define MSG_IOPL_NOT_ENABLED            197       /* IOPL not enabled */
+#define MSG_INVALID_SEGDPL              198       /* Invalid privilege level */
+#define MSG_AUTODATASEG_EXCEEDS_64K     199       /* Privilege level exceeds 64K */
+/*  200 not used */
+#define MSG_RELOC_CHAIN_XEEDS_SEGMENT   201       /* Ring must be movable */
+#define MSG_INFLOOP_IN_RELOC_CHAIN      202       /* infinite loop */
+#define MSG_ENVVAR_NOT_FOUND            203       /* environment variable not found */
+#define MSG_SIGNAL_NOT_SENT             205       /* DOS signal not sent */
+/* */
+#define MSG_MR_CANT_FORMAT              317
+#define MSG_MR_NOT_FOUND                318
+#define MSG_MR_READ_ERROR               319
+#define MSG_MR_IVCOUNT_ERROR            320       /*IvCount out of range */
+#define MSG_MR_UN_PERFORM               321
+/* */
+#define MSG_DIS_ERROR                   355
+#define MSG_NO_COUNTRY_SYS              396
+#define MSG_OPEN_COUNTRY_SYS            397
+#define MSG_COUNTRY_NO_TYPE             401
+/* 900 - 999 reserved for IBM Far East */
+/* 1000 not used */
+#define MSG_BAD_PARM1                   1001      /* invalid parm */
+#define MSG_BAD_PARM2                   1002      /* invalid parm with specified input */
+#define MSG_BAD_SYNTAX                  1003      /* invalid syntax */
+/* 1004 not used */
+#define MSG_SWAP_INVALID_DRIVE          1470      /* Invalid drive %1 specified SWAPPATH */
+#define MSG_SWAP_INVALID_PATH           1471      /* Invalid path %1 specified in SWAPPATH */
+#define MSG_SWAP_CANNOT_CREATE          1472      /* Cannot create swap file %1 */
+#define MSG_SWAP_DISABLED               1473      /* Segment swapping is disabled */
+#define MSG_SWAP_CANT_INIT              1474      /* Cannot initialize swapper */
+#define MSG_SWAP_NOT_READY              1500      /* diskette containing swap file not rdy */
+#define MSG_SWAP_WRITE_PROTECT          1501      /* Diskette containing swap file wrpro */
+#define MSG_SWAP_IN_ERROR               1502      /* I/O error on swap file */
+#define MSG_SWAP_IO_ERROR               1502      /* I/O error on swap file */
+#define MSG_SWAP_FILE_FULL              1503      /* Swap file is full */
+#define MSG_SWAP_TABLE_FULL             1504      /* Swap control table full */
+/* */
+#define MSG_SYSINIT_INVAL_CMD           1195      /* Unrecognized command */
+#define MSG_SYSINIT_INVAL_PARM          1196      /* Invalid parameter */
+#define MSG_SYSINIT_MISSING_PARM        1197      /* Missing parameter */
+/* 1198 - 1199 not used */
+#define MSG_SYSINIT_DOS_FAIL            1200      /* Cannot create DOS mode */
+/* 1201 - 1204 not used */
+#define MSG_SYSINIT_DOS_MODIFIED        1205      /* DOS mode memory modified by DD */
+#define MSG_SYSINIT_UFILE_NO_MEM        1206      /* Out of memory loading user program or DD */
+/* 1207 not used */
+#define MSG_SAD_INSERT_DUMP             1395      /* insert dump disk - rasmsg */
+/* 1517 not used */
+#define MSG_SYSINIT_SFILE_NOT_FND       1518      /* System file not found */
+#define MSG_SYSINIT_SFILE_NO_MEM        1519      /* Out of memory loading system program or DD */
+/* 1520 not used */
+#define MSG_SYSINIT_TOO_MANY_PARMS      1521      /* Too many parms on line */
+/* 1522 not used */
+#define MSG_SYSINIT_MISSING_SYMB        1523      /* No equal or space */
+/* 1708 - 1717 not used */
+#define MSG_SYSINIT_UFILE_NOT_FND       1718      /* User file not found */
+#define MSG_SYSINIT_UDRVR_INVAL         1719      /* User device driver invalid */
+/* 1720 not used */
+#define MSG_SYSINIT_BANNER              1721      /* Version banner message */
+#define MSG_SYSINIT_CANT_LOAD_MOD       1722      /* Can't load module */
+#define MSG_SYSINIT_EPT_MISSING         1723      /* Entry point missing */
+#define MSG_SYSINIT_CANT_OPEN_CON       1724      /* Can't open con */
+#define MSG_SYSINIT_WRONG_HANDLE        1725      /* wrong handle for standard input file */
+#define MSG_SYSINIT_PRESS_ENTER         1726      /* Press enter to continue */
+#define MSG_SYSINIT_CANT_GET_CACHE      1727      /* Can't allocate cache memory */
+/* 1728 not used */
+#define MSG_SYSINIT_VIO_CP              1729      /* VioSetCp failed */
+#define MSG_SYSINIT_KBD_CP              1730      /* KbdSetCp failed */
+/* 1731 - 1732 not used */
+#define MSG_SYSINIT_SCFILE_INVAL        1733      /* System country file is bad */
+/* 1734 not used */
+#define MSG_SYSINIT_CP_ASSUME           1735      /* Assumed codepage */
+/* 1736 not used */
+#define MSG_SYSINIT_CP_FATAL            1737      /* Codepage switching disabled */
+#define MSG_SYSINIT_NOT_INIT_NMI        1738      /* cannot initial NMI ALSO FOR MODE MGR */
+#define MSG_ASYNC_INSTALL               1899      /* Com installed */
+#define MSG_ASYNC_COM_DEVICE            1900      /* COM device driver */
+/* 1901 - 1914 utilmid2 */
+#define MSG_INTERNAL_ERROR              1915      /* Internal error in the Kernel */
+#define MSG_USER_ERROR                  1916      /* user error */
+/* 1917 - 1918 not used */
+#define MSG_SYSINIT_UEXEC_FAIL          1919      /* User program won't execute */
+/* 1920 - 1924 not used */
+#define MSG_SYSINIT_SEXEC_FAIL          1925      /* System program won't execute */
+#define MSG_GEN_PROT_FAULT              1926      /* General protect fault trap d */
+#define MSG_CHANGE_INT_VECTOR           1927      /* real mode changed interrupt vector */
+#define MSG_NOMEM_FOR_RELOAD            1928      /* no storage to reload code or segment */
+#define MSG_STACK_OVERFLOW              1929      /* argument stack low */
+#define MSG_TRAP0                       1930      /* divide error */
+#define MSG_TRAP1                       1931      /* single step trap */
+#define MSG_TRAP2                       1932      /* hardware memory error */
+#define MSG_TRAP3                       1933      /* breakpoint instruction */
+#define MSG_TRAP4                       1934      /* computation overflow */
+#define MSG_TRAP5                       1935      /* index out of range */
+#define MSG_TRAP6                       1936      /* incorrect instruction */
+#define MSG_TRAP7                       1937      /* cannot process instruction */
+#define MSG_TRAP8                       1938      /* double exception error */
+#define MSG_TRAP9                       1939      /* math coprocessor */
+#define MSG_TRAPA                       1940      /* task state segment */
+#define MSG_TRAPB                       1941      /* segment not in memory */
+#define MSG_TRAPC                       1942      /* memory beyond the stack segment */
+#define MSG_TRAPD                       1943      /* bad segment value */
+#define MSG_NMI                         1944      /* nonmaskable interrupt */
+#define MSG_NMI_EXC1                    1945      /* error with memory system board */
+#define MSG_NM12_EXC2                   1946      /* error memory cards */
+#define MSG_NMI2_EXC3                   1947      /* timeout on dma */
+#define MSG_NMI2_EXC4                   1948      /* timeout by watchdog timer */
+/* 1949 not used */
+#define MSG_NPXIEMSG                    1950      /* incorrect operation */
+#define MSG_NPXDEMSG                    1951      /* denormalized operand */
+#define MSG_NPXZEMSG                    1952      /* zero divide */
+#define MSG_NPXOEMSG                    1953      /* overflow */
+#define MSG_NPXUEMSG                    1954      /* underflow */
+#define MSG_NPXPEMSG                    1955      /* precision */
+#define MSG_NPXINSTEMSG                 1956      /* error occurred at address */
+#define MSG_SYSINIT_BOOT_ERROR          2025      /* boot error */
+#define MSG_SYSINIT_BIO_NOT_FD          2026      /* COMMAND.COM not found */
+#define MSG_SYSINIT_INSER_DK            2027      /* Insert diskette */
+#define MSG_SYSINIT_DOS_NOT_FD          2028      /* IBMDOS.COM not found */
+#define MSG_SYSINIT_DOS_NOT_VAL         2029      /* IBMDOS.COM not valid */
+#define MSG_SYSINIT_MORE_MEM            2030      /* need more memory */
+/* 2031 - 2056 utilmid3 */
+/* 2057 - 2063 not used */
+#define MSG_SYSINIT_DOS_NO_MEM          2064      /* Out of memory starting DOS mode */
+#define MSG_SYSINIT_SYS_STOPPED         2065      /* System is stopped */
+#define MSG_SYSINIT_DOS_STOPPED         2066      /* DOS mode not started */
+#define MSG_SYSINIT_SDRVR_INVAL         2067      /* System device driver invalid */
+#define MSG_SYSINIT_MSG_LOST            2068      /* Messages lost */
+#define MSG_SYSINIT_UCFILE_INVAL        2069      /* User country file is bad */
+#define MSG_DEMAND_LOAD_FAILED          2070      /* the demand load has failed */
diff --git a/v4.0/src/H/CDS.H b/v4.0/src/H/CDS.H
new file mode 100644
index 0000000..8ff2b26
--- /dev/null
+++ b/v4.0/src/H/CDS.H
@@ -0,0 +1,25 @@
+/* structure of a CDS */
+
+#define DIRSTRLEN   64+3
+
+struct CDSType
+{
+        char            text[DIRSTRLEN] ;
+        unsigned        flags ;
+        long            pDPB ;
+        long            ID ;
+        unsigned        wUser ;
+        unsigned        cbEnd ;
+        char            type ;
+        long            ifs_hdr ;
+        char            fsda[2] ;
+} ;
+
+#define CDSNET          0x8000
+#define CDSINUSE        0x4000
+#define CDSSPLICE       0x2000
+#define CDSLOCAL        0x1000
+
+extern char fGetCDS() ;
+extern char fPutCDS() ;
+
\ No newline at end of file
diff --git a/v4.0/src/H/COMSUB.H b/v4.0/src/H/COMSUB.H
new file mode 100644
index 0000000..bf5d643
--- /dev/null
+++ b/v4.0/src/H/COMSUB.H
@@ -0,0 +1,166 @@
+/*static char *SCCSID = "@(#)comsub.h   8.2 87/02/13";*/
+/******************** START OF SPECIFICATIONS ************************/
+/*                                                                   */
+/* SOURCE FILE NAME: COMSUB.H                                        */
+/*                                                                   */
+/* DESCRIPTIVE NAME: COMMON SUBROUTINE INCLUDE FILE                  */
+/*                                                                   */
+/* FUNCTION:                                                         */
+/*                                                                   */
+/*                                                                   */
+/* NOTES:                                                            */
+/*                                                                   */
+/* ENTRY POINTS:  NONE                                               */
+/*                                                                   */
+/* EXTERNAL REFERENCE:  NONE                                         */
+/*                                                                   */
+/* RELEASE:                                                          */
+/*                                                                   */
+/*    VERSION    DATE           REASON                               */
+/*                                                                   */
+/*     1.00    03/10/1986    initial version                         */
+/*     1.01    03/11/1986    define external pointer to invalid      */
+/*                           argument string (CORA's request)        */
+/*     1.02    03/18/1986    external declaration of "computmsg"     */
+/*                           parm 1 : char far * -> char far **      */
+/*     1.03    03/24/1986    delete "comverflnm" related decralation */
+/*                           change "int" to "unsigned"              */
+/*     1.04    03/25/1986  - add function external declaration of    */
+/*                           "comcheckdosver"                        */
+/*                         - delete "far" declaration.               */
+/*     2.00    04/15/1986    the first intigration version           */
+/*     2.01    05/21/1986  - add "extern rctomid()"                  */
+/*     2.02    05/22/1986  - add DBCS common routines                */
+/*     2.03    06/17/1986  - add "com_toupper" and "com_tolower"     */
+/*     2.04    06/18/1986  - comment out SCCSID tag                  */
+/*     2.05    06/25/1986  - add filehandle enabling switch          */
+/*     2.06    08/07/1986  - add new routine "realopen"              */
+/*     2.07    02/13/1987  - add "cm_trace_cmd_flg".                 */
+/*********************************************************************/
+
+/*************************************
+ *                                   *
+ *  external function declaration    *
+ *                                   *
+ *************************************/
+
+extern unsigned comgetarg (
+        unsigned *,        /* number of arguments                   */
+        char **,           /* pointer array of original arguments   */
+        char **,           /* pointer of argument unit character    */
+                           /* storage                               */
+        unsigned,          /* depth of new argument pointer array   */
+        char *,            /* broken down argument character buffer */
+        unsigned,          /* size of argument character buffer     */
+        char *,            /* current defualt drive name            */
+        char *);           /* switching character                   */
+/*
+ * print a message and get a response
+ */
+extern unsigned computmsg (
+        char **,           /* table of variables  to insert       */
+        unsigned,          /* number of variables to insert       */
+        unsigned,          /* message id                          */
+        char *,            /* message file name                   */
+        unsigned,          /* output device type                  */
+        unsigned,          /* response type                       */
+        char *,            /* response data area                  */
+        unsigned);         /* size of response data area          */
+/*
+ *  verify correct DOS version
+ */
+extern unsigned comcheckdosver();
+
+/*
+ *  return code conversion to message id
+ */
+extern unsigned rctomid(
+        unsigned);         /* return code to converted to msg id */
+
+/*
+ *  open drive in real mode
+ */
+extern unsigned far pascal REALOPEN(
+        char far *,        /* pointer to drive name */
+        unsigned far *,    /* pointer to drive handle */
+        unsigned);         /* open mode */
+
+/*****************************************/
+/*                                       */
+/*         DBCS common subroutine        */
+/*                                       */
+/*****************************************/
+/*
+ *   search the first substring occurrence in a string
+ */
+extern unsigned char
+*com_substr(
+   unsigned char *,           /* source string */
+   unsigned char *);          /* target string */
+
+/*
+ *   search the last charater occurrence in a string
+ */
+extern unsigned char
+*com_strrchr(
+   unsigned char *,           /* source string */
+   unsigned char );          /* target string */
+
+/*
+ *   compare two strings with regard to case
+ */
+extern int
+com_strcmpi(
+  unsigned char *,            /* source string         */
+  unsigned char *);           /* string to be compared */
+
+/*
+ *   convert a string to uppercase
+ */
+extern unsigned char
+*com_strupr(
+   unsigned char *);          /* string to be converted */
+
+/*
+ *   convert a string to lowercase
+ */
+extern unsigned char
+*com_strlwr(
+   unsigned char *);          /* string to be converted */
+
+/*
+ *   search the first occurrence of a character in a string
+ */
+extern char *com_strchr(
+   unsigned char *,           /* a source string */
+   unsigned char );           /* a character to be searched */
+
+/*
+ *   convert character to uppercase
+ */
+extern int com_toupper(
+   unsigned char );           /* character to be converted to uppercase */
+
+/*
+ *   convert character to lowercase
+ */
+extern int com_tolower(
+   unsigned char );           /* character to be converted to lowercase */
+
+/*************************************
+ *                                   *
+ *   external variable declaration   *
+ *                                   *
+ *************************************/
+extern unsigned cm_invalid_parm_pointer;  /* points to first detected    */
+                                          /* invalid argument string     */
+
+extern char cm_flhandle_enable_sw;    /* enable filehandle input for         */
+                                      /* computmsg routine                   */
+                                      /*                                     */
+                                      /* if this switch is on (non-zero),    */
+                                      /* filehandle can be set in devicetype.*/
+
+extern char cm_trace_cmd_flg;         /* ignore drive validity check.        */
+                                      /*   if it set to 1, COMGETARG does    */
+                                      /*   not check drive validity.         */
diff --git a/v4.0/src/H/COPYRIGH.H b/v4.0/src/H/COPYRIGH.H
new file mode 100644
index 0000000..530203d
--- /dev/null
+++ b/v4.0/src/H/COPYRIGH.H
@@ -0,0 +1,3 @@
+char    *copyright1 =  "MS DOS Version 4.00 (C)Copyright 1988 Microsoft Corp";
+char    *copyright2 =  "Licensed Material - Property of Microsoft  ";
+
diff --git a/v4.0/src/H/DOSCALLS.H b/v4.0/src/H/DOSCALLS.H
new file mode 100644
index 0000000..3d11677
--- /dev/null
+++ b/v4.0/src/H/DOSCALLS.H
@@ -0,0 +1,552 @@
+/*static char *SCCSID = "@(#)doscalls.hwc       10.3 87/05/27";*/
+struct DateTime {
+        unsigned char hour;
+        unsigned char minutes;
+        unsigned char seconds;
+        unsigned char hundredths;
+        unsigned char day;
+        unsigned char month;
+        unsigned year;
+        int timezone;
+        unsigned char day_of_week;
+        };
+struct FileFindBuf {
+        unsigned create_date;
+        unsigned create_time;
+        unsigned access_date;
+        unsigned access_time;
+        unsigned write_date;
+        unsigned write_time;
+        unsigned long file_size;
+        unsigned long falloc_size;
+        unsigned attributes;
+        unsigned char string_len;
+        char file_name[13];
+        };
+struct FileStatus {
+        unsigned create_date;
+        unsigned create_time;
+        unsigned access_date;
+        unsigned access_time;
+        unsigned write_date;
+        unsigned write_time;
+        unsigned long file_size;
+        unsigned long falloc_size;
+        unsigned attributes;
+        };
+struct FSAllocate {
+        unsigned long filsys_id;
+        unsigned long sec_per_unit;
+        unsigned long num_units;
+        unsigned long avail_units;
+        unsigned bytes_sec;
+        };
+struct ProcIDsArea {
+        unsigned procid_cpid;
+        unsigned procid_ctid;
+        unsigned procid_ppid;
+        };
+struct  ResultCodes {
+        unsigned TermCode_PID ;
+        unsigned ExitCode ;
+        };
+struct countrycode {
+        unsigned country;
+        unsigned codepage;
+};
+extern unsigned far pascal DOSCREATETHREAD (
+        void (far *)(void),
+        unsigned far *,
+        unsigned char far * );
+extern unsigned far pascal DOSRESUMETHREAD (
+        unsigned );
+extern unsigned far pascal DOSSUSPENDTHREAD (
+        unsigned );
+extern unsigned far pascal DOSCWAIT (
+        unsigned,
+        unsigned,
+        struct ResultCodes far *,
+        unsigned far *,
+        unsigned );
+extern void far pascal DOSENTERCRITSEC (void);
+extern unsigned far pascal DOSEXECPGM (
+        char far *,
+        unsigned,
+        unsigned,
+        char far *,
+        char far *,
+        struct ResultCodes far *,
+        char far * );
+extern void far pascal DOSEXIT (
+        unsigned,
+        unsigned );
+extern void far pascal DOSEXITCRITSEC (void);
+extern unsigned far pascal DOSEXITLIST (
+        unsigned,
+        void (far *)(void) );
+extern unsigned far pascal DOSGETPID (
+        struct ProcIDsArea far *);
+extern unsigned far pascal DOSGETPRTY (
+        unsigned,
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal DOSSETPRTY (
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSKILLPROCESS (
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSHOLDSIGNAL (
+        unsigned );
+extern unsigned far pascal DOSFLAGPROCESS (
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSSETSIGHANDLER (
+        void (far pascal *)(),
+        unsigned long far *,
+        unsigned far *,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSSENDSIGNAL (
+        unsigned,
+        unsigned);
+extern unsigned far pascal DOSMAKEPIPE (
+        unsigned far *,
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal DOSCLOSEQUEUE (
+        unsigned ) ;
+extern unsigned far pascal DOSCREATEQUEUE (
+        unsigned far *,
+        unsigned,
+        char far * ) ;
+extern unsigned far pascal DOSOPENQUEUE (
+        unsigned far *,
+        unsigned far *,
+        char far * ) ;
+extern unsigned far pascal DOSPEEKQUEUE (
+        unsigned,
+        unsigned long far *,
+        unsigned far *,
+        unsigned long far *,
+        unsigned far *,
+        unsigned char,
+        unsigned char far *,
+        unsigned long ) ;
+extern unsigned far pascal DOSPURGEQUEUE (
+        unsigned ) ;
+extern unsigned far pascal DOSQUERYQUEUE (
+        unsigned,
+        unsigned far * );
+extern unsigned far pascal DOSREADQUEUE (
+        unsigned,
+        unsigned long far *,
+        unsigned far *,
+        unsigned long far *,
+        unsigned,
+        unsigned char,
+        unsigned char far *,
+        unsigned long ) ;
+extern unsigned far pascal DOSWRITEQUEUE (
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned char far *,
+        unsigned char );
+extern unsigned far pascal DOSSEMCLEAR (
+        unsigned long );
+extern unsigned far pascal DOSSEMREQUEST (
+        unsigned long,
+        long );
+extern unsigned far pascal DOSSEMSET (
+        unsigned long );
+extern unsigned far pascal DOSSEMSETWAIT (
+        unsigned long,
+        long );
+extern unsigned far pascal DOSSEMWAIT (
+        unsigned long,
+        long );
+extern unsigned far pascal DOSMUXSEMWAIT (
+        unsigned far *,
+        unsigned far *,
+        long );
+extern unsigned far pascal DOSCLOSESEM (
+        unsigned long );
+extern unsigned far pascal DOSCREATESEM (
+        unsigned,
+        unsigned long far *,
+        char far * );
+extern unsigned far pascal DOSOPENSEM (
+        unsigned long far *,
+        char far * );
+extern unsigned far pascal DOSGETDATETIME (
+        struct DateTime far * );
+extern unsigned far pascal DOSSETDATETIME (
+        struct DateTime far * );
+extern unsigned far pascal DOSSLEEP (
+        unsigned long );
+extern unsigned far pascal DOSGETTIMERINT (
+        unsigned far * );
+extern unsigned far pascal DOSTIMERASYNC (
+        unsigned long,
+        unsigned long,
+        unsigned far * );
+extern unsigned far pascal DOSTIMERSTART (
+        unsigned long,
+        unsigned long,
+        unsigned far * );
+extern unsigned far pascal DOSTIMERSTOP (
+        unsigned );
+extern unsigned far pascal DOSALLOCSEG (
+        unsigned,
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal DOSALLOCSHRSEG (
+        unsigned,
+        char far *,
+        unsigned far * );
+extern unsigned far pascal DOSGETSHRSEG (
+        char far *,
+        unsigned far * );
+extern unsigned far pascal DOSGIVESEG (
+        unsigned,
+        unsigned,
+        unsigned far * );
+extern unsigned far pascal DOSGETSEG (
+        unsigned );
+extern unsigned far pascal DOSLOCKSEG (
+        unsigned );
+extern unsigned far pascal DOSUNLOCKSEG (
+        unsigned );
+extern unsigned far pascal DOSMEMAVAIL (
+        unsigned long far * );
+extern unsigned far pascal DOSREALLOCSEG (
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSFREESEG (
+        unsigned );
+extern unsigned far pascal DOSALLOCHUGE (
+        unsigned,
+        unsigned,
+        unsigned far *,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSGETHUGESHIFT (
+        unsigned far *);
+extern unsigned far pascal DOSREALLOCHUGE (
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSCREATECSALIAS (
+        unsigned,
+        unsigned far * );
+extern unsigned far pascal DOSSUBALLOC (
+        unsigned,
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal DOSSUBFREE (
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSSUBSET (
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSLOADMODULE (
+        char far *,
+        unsigned,
+        char far *,
+        unsigned far * );
+extern unsigned far pascal DOSFREEMODULE (
+        unsigned );
+extern unsigned far pascal DOSGETPROCADDR (
+        unsigned,
+        char far *,
+        unsigned long far * );
+extern unsigned far pascal DOSGETMODHANDLE (
+        char far *,
+        unsigned far *);
+extern unsigned far pascal DOSGETMODNAME (
+        unsigned,
+        unsigned,
+        char far * );
+extern unsigned far pascal DOSBEEP (
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSCLIACCESS (void);
+extern unsigned far pascal DOSDEVCONFIG (
+        unsigned char far *,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSDEVIOCTL (
+        char far *,
+        char far *,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSIOACCESS (
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSPORTACCESS (
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSSGNUM (
+        unsigned far *);
+extern unsigned far pascal DOSSGSWITCH (
+        unsigned );
+extern unsigned far pascal DOSSGSWITCHME (
+        unsigned );
+extern unsigned far pascal DOSMONOPEN (
+        char far *,
+        unsigned far * );
+extern unsigned far pascal DOSMONCLOSE (
+        unsigned );
+extern unsigned far pascal DOSMONREG (
+        unsigned,
+        unsigned char far *,
+        unsigned char far *,
+        unsigned,
+        unsigned );
+extern unsigned far pascal DOSMONREAD (
+        unsigned char far *,
+        unsigned char,
+        unsigned char far *,
+        unsigned far * );
+extern unsigned far pascal DOSMONWRITE (
+        unsigned char far *,
+        unsigned char far *,
+        unsigned );
+extern unsigned far pascal DOSBUFRESET (
+        unsigned );
+extern unsigned far pascal DOSCHDIR (
+        char far *,
+        unsigned long );
+extern unsigned far pascal DOSCHGFILEPTR (
+        unsigned,
+        long,
+        unsigned,
+        unsigned long far * );
+extern unsigned far pascal DOSCLOSE (
+        unsigned );
+extern unsigned far pascal DOSDELETE (
+        char far *,
+        unsigned long );
+extern unsigned far pascal DOSDUPHANDLE (
+        unsigned,
+        unsigned far * );
+extern unsigned far pascal DOSFINDCLOSE (
+        unsigned );
+extern unsigned far pascal DOSFINDFIRST (
+        char far *,
+        unsigned far *,
+        unsigned,
+        struct FileFindBuf far *,
+        unsigned,
+        unsigned far *,
+        unsigned long );
+extern unsigned far pascal DOSFINDNEXT (
+        unsigned,
+        struct FileFindBuf far *,
+        unsigned,
+        unsigned far * );
+extern unsigned far pascal DOSFILELOCKS (
+        unsigned,
+        long far *,
+        long far * );
+extern unsigned far pascal DOSGETINFOSEG (
+        unsigned far *,
+        unsigned far * );
+extern unsigned far pascal DOSMKDIR (
+        char far *,
+        unsigned long );
+extern unsigned far pascal DOSMOVE (
+        char far *,
+        char far *,
+        unsigned long );
+extern unsigned far pascal DOSNEWSIZE (
+        unsigned,
+        unsigned long );
+extern unsigned far pascal DOSOPEN (
+        char far *,
+        unsigned far *,
+        unsigned far *,
+        unsigned long,
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned long );
+extern unsigned far pascal DOSQCURDIR (
+        unsigned,
+        char far *,
+        unsigned far * );
+extern unsigned far pascal DOSQCURDISK (
+        unsigned far *,
+        unsigned long far * );
+extern unsigned far pascal DOSQFHANDSTATE (
+        unsigned,
+        unsigned far * );
+extern unsigned far pascal DOSQFILEINFO (
+        unsigned,
+        unsigned,
+        char far *,
+        unsigned );
+extern unsigned far pascal DOSQFILEMODE (
+        char far *,
+        unsigned far *,
+        unsigned long );
+extern unsigned far pascal DOSQFSINFO (
+        unsigned,
+        unsigned,
+        char far *,
+        unsigned );
+extern unsigned far pascal DOSQHANDTYPE (
+        unsigned,
+        unsigned far *,
+        unsigned far * );
+extern unsigned far pascal DOSQVERIFY (
+        unsigned far * );
+extern unsigned far pascal DOSREAD (
+        unsigned,
+        char far *,
+        unsigned,
+        unsigned far * );
+extern unsigned far pascal DOSREADASYNC (
+        unsigned,
+        unsigned long far *,
+        unsigned far *,
+        char far *,
+        unsigned,
+        unsigned far * );
+extern unsigned far pascal DOSRMDIR (
+        char far *,
+        unsigned long );
+extern unsigned far pascal DOSSELECTDISK (
+        unsigned );
+extern unsigned far pascal DOSSETFHANDSTATE (
+        unsigned,
+        unsigned);
+extern unsigned far pascal DOSSETFSINFO (
+        unsigned,
+        unsigned,
+        char far *,
+        unsigned );
+extern unsigned far pascal DOSSETFILEINFO (
+        unsigned,
+        unsigned,
+        char far *,
+        unsigned );
+extern unsigned far pascal DOSSETFILEMODE (
+        char far *,
+        unsigned,
+        unsigned long );
+extern unsigned far pascal DOSSETMAXFH (
+        unsigned );
+extern unsigned far pascal DOSSETVERIFY (
+        unsigned );
+extern unsigned far pascal DOSWRITE (
+        unsigned,
+        char far *,
+        unsigned,
+        unsigned far * );
+extern unsigned far pascal DOSWRITEASYNC (
+        unsigned,
+        unsigned long far *,
+        unsigned far *,
+        char far *,
+        unsigned,
+        unsigned far * );
+extern unsigned far pascal DOSERROR (
+        unsigned );
+extern unsigned far pascal DOSSETVEC (
+        unsigned,
+        void (far *)(void),
+        void (far * far *)(void) );
+extern unsigned far pascal DOSGETMESSAGE (
+        char far * far *,
+        unsigned,
+        char far *,
+        unsigned,
+        unsigned,
+        char far *,
+        unsigned far * );
+extern unsigned far pascal DOSERRCLASS (
+        unsigned,
+        unsigned far *,
+        unsigned far *,
+        unsigned far * );
+extern unsigned far pascal DOSINSMESSAGE (
+        char far * far *,
+        unsigned,
+        char far *,
+        unsigned,
+        char far *,
+        unsigned,
+        unsigned far * );
+extern unsigned far pascal DOSPUTMESSAGE (
+        unsigned,
+        unsigned,
+        char far * );
+extern unsigned far pascal DOSSYSTRACE (
+        unsigned,
+        unsigned,
+        unsigned,
+        char far * );
+extern unsigned far pascal DOSGETENV (
+        unsigned far *,
+        unsigned far * );
+extern unsigned far pascal DOSSCANENV (
+     char far *,
+     char far * far * );
+extern unsigned far pascal DOSSEARCHPATH (
+     unsigned,
+     char far *,
+     char far *,
+     char far *,
+     unsigned );
+extern unsigned far pascal DOSGETVERSION (
+        unsigned far * );
+extern unsigned far pascal DOSGETMACHINEMODE (
+        unsigned char far * );
+extern unsigned far pascal DOSGETCTRYINFO (
+        unsigned,
+        struct countrycode far *,
+        char far *,
+        unsigned far * );
+extern unsigned far pascal DOSGETDBCSEV (
+        unsigned,
+        struct countrycode far *,
+        char far * );
+extern unsigned far pascal DOSCASEMAP (
+        unsigned,
+        struct countrycode far *,
+        char far * );
+extern unsigned far pascal DOSGETCOLLATE (
+        unsigned,
+        struct countrycode far *,
+        char far *,
+        unsigned far *);
+extern unsigned far pascal DOSGETCP (
+        unsigned,
+        unsigned far *,
+        unsigned far *);
+extern unsigned far pascal DOSSETCP (
+        unsigned,
+        unsigned);
+extern unsigned far pascal DOSPHYSICALDISK (
+        unsigned,
+        char far *,
+        unsigned,
+        char far *,
+        unsigned);
+extern unsigned far pascal DOSSYSTEMSERVICE (
+        unsigned,
+        char far *,
+        char far *);
diff --git a/v4.0/src/H/DPB.H b/v4.0/src/H/DPB.H
new file mode 100644
index 0000000..bfd28ac
--- /dev/null
+++ b/v4.0/src/H/DPB.H
@@ -0,0 +1,30 @@
+ struct DPBType {
+        char     drive ;        /* physical drive number                   */
+        char     unit ;         /* unit within device                      */
+        unsigned cbSector ;     /* bytes per sector                        */
+        char     mask ;         /* sectors/alloc unit - 1                  */
+        char     shift ;        /* bit to shift                            */
+        unsigned secFAT ;       /* sector number of first FAT              */
+        char     cFAT ;         /* count of FATs                           */
+        unsigned cDirEnt ;      /* count of root directory entries         */
+        unsigned secData ;      /* first data sector                       */
+        unsigned cCluster ;     /* max number of clusters on drive         */
+        unsigned csecFAT ;      /* sectors in each FAT                     */
+        unsigned secDir ;       /* first sector of root dir                */
+        long     pDevice ;      /* pointer to device header                */
+        char     media ;        /* last media in drive                     */
+        char     fFirst ;       /* TRUE => media check needed              */
+        long     nextDPB ;      /* pointer to next dpb                     */
+        unsigned clusFree ;     /* cluster number of last alloc            */
+        unsigned FreeCnt ;      /* count of free clusters, -1 if unk       */
+/*      char     SyncFlg ;      /* sync flags, (see below)                 */
+        } ;
+
+/*      Definitions of SyncFlg values from DPB.INC  */
+
+#define DPB_ABUSY  1        /* some process is allocating clusters */
+#define DPB_AWANT  2        /* some process waiting to allocate    */
+#define DPB_FBUSY  4        /* some process is reading FAT         */
+#define DPB_FWANT  8        /* some process waiting to read FAT    */
+
+
\ No newline at end of file
diff --git a/v4.0/src/H/ERROR.H b/v4.0/src/H/ERROR.H
new file mode 100644
index 0000000..cc51e09
--- /dev/null
+++ b/v4.0/src/H/ERROR.H
@@ -0,0 +1,294 @@
+/*static char *SCCSID = "@(#)error.h    7.11 86/09/29";*/
+/* XENIX calls all return error codes through AX.  If an error occurred then */
+/* the carry bit will be set and the error code is in AX.  If no error occurred */
+/* then the carry bit is reset and AX contains returned info. */
+/* */
+/* Since the set of error codes is being extended as we extend the operating */
+/* system, we have provided a means for applications to ask the system for a */
+/* recommended course of action when they receive an error. */
+/* */
+/* The GetExtendedError system call returns a universal error, an error */
+/* location and a recommended course of action. The universal error code is */
+/* a symptom of the error REGARDLESS of the context in which GetExtendedError */
+/* is issued. */
+/* */
+
+/* */
+/* These are the 2.0 error codes */
+/* */
+#define NO_ERROR                        0
+#define ERROR_INVALID_FUNCTION          1
+#define ERROR_FILE_NOT_FOUND            2
+#define ERROR_PATH_NOT_FOUND            3
+#define ERROR_TOO_MANY_OPEN_FILES       4
+#define ERROR_ACCESS_DENIED             5
+#define ERROR_INVALID_HANDLE            6
+#define ERROR_ARENA_TRASHED             7
+#define ERROR_NOT_ENOUGH_MEMORY         8
+#define ERROR_INVALID_BLOCK             9
+#define ERROR_BAD_ENVIRONMENT           10
+#define ERROR_BAD_FORMAT                11
+#define ERROR_INVALID_ACCESS            12
+#define ERROR_INVALID_DATA              13
+/***** reserved                 EQU     14      ; ***** */
+#define ERROR_INVALID_DRIVE             15
+#define ERROR_CURRENT_DIRECTORY         16
+#define ERROR_NOT_SAME_DEVICE           17
+#define ERROR_NO_MORE_FILES             18
+/* */
+/* These are the universal int 24 mappings for the old INT 24 set of errors */
+/* */
+#define ERROR_WRITE_PROTECT             19
+#define ERROR_BAD_UNIT                  20
+#define ERROR_NOT_READY                 21
+#define ERROR_BAD_COMMAND               22
+#define ERROR_CRC                       23
+#define ERROR_BAD_LENGTH                24
+#define ERROR_SEEK                      25
+#define ERROR_NOT_DOS_DISK              26
+#define ERROR_SECTOR_NOT_FOUND          27
+#define ERROR_OUT_OF_PAPER              28
+#define ERROR_WRITE_FAULT               29
+#define ERROR_READ_FAULT                30
+#define ERROR_GEN_FAILURE               31
+/* */
+/* These are the new 3.0 error codes reported through INT 24 */
+/* */
+#define ERROR_SHARING_VIOLATION         32
+#define ERROR_LOCK_VIOLATION            33
+#define ERROR_WRONG_DISK                34
+#define ERROR_FCB_UNAVAILABLE           35
+#define ERROR_SHARING_BUFFER_EXCEEDED   36
+/* */
+/* New OEM network-related errors are 50-79 */
+/* */
+#define ERROR_NOT_SUPPORTED             50
+/* */
+/* End of INT 24 reportable errors */
+/* */
+#define ERROR_FILE_EXISTS               80
+#define ERROR_DUP_FCB                   81        /* ***** */
+#define ERROR_CANNOT_MAKE               82
+#define ERROR_FAIL_I24                  83
+/* */
+/* New 3.0 network related error codes */
+/* */
+#define ERROR_OUT_OF_STRUCTURES         84
+#define ERROR_ALREADY_ASSIGNED          85
+#define ERROR_INVALID_PASSWORD          86
+#define ERROR_INVALID_PARAMETER         87
+#define ERROR_NET_WRITE_FAULT           88
+/* */
+/* New error codes for 4.0 */
+/* */
+#define ERROR_NO_PROC_SLOTS             89        /* no process slots available */
+#define ERROR_NOT_FROZEN                90
+#define ERR_TSTOVFL                     91        /* timer service table overflow */
+#define ERR_TSTDUP                      92        /* timer service table duplicate */
+#define ERROR_NO_ITEMS                  93        /* There were no items to operate upon */
+#define ERROR_INTERRUPT                 95        /* interrupted system call */
+
+#define ERROR_TOO_MANY_SEMAPHORES       100
+#define ERROR_EXCL_SEM_ALREADY_OWNED    101
+#define ERROR_SEM_IS_SET                102
+#define ERROR_TOO_MANY_SEM_REQUESTS     103
+#define ERROR_INVALID_AT_INTERRUPT_TIME 104
+
+#define ERROR_SEM_OWNER_DIED            105       /* waitsem found owner died */
+#define ERROR_SEM_USER_LIMIT            106       /* too many procs have this sem */
+#define ERROR_DISK_CHANGE               107       /* insert disk b into drive a */
+#define ERROR_DRIVE_LOCKED              108       /* drive locked by another process */
+#define ERROR_BROKEN_PIPE               109       /* write on pipe with no reader */
+/* */
+/* New error codes for 5.0 */
+/* */
+#define ERROR_OPEN_FAILED               110       /* open/created failed due to */
+                                                  /* explicit fail command */
+#define ERROR_BUFFER_OVERFLOW           111       /* buffer passed to system call */
+                                                  /* is too small to hold return */
+                                                  /* data. */
+#define ERROR_DISK_FULL                 112       /* not enough space on the disk */
+                                                  /* (DOSNEWSIZE/w_NewSize) */
+#define ERROR_NO_MORE_SEARCH_HANDLES    113       /* can't allocate another search */
+                                                  /* structure and handle. */
+                                                  /* (DOSFINDFIRST/w_FindFirst) */
+#define ERROR_INVALID_TARGET_HANDLE     114       /* Target handle in DOSDUPHANDLE */
+                                                  /* is invalid */
+#define ERROR_PROTECTION_VIOLATION      115       /* Bad user virtual address */
+#define ERROR_VIOKBD_REQUEST            116
+#define ERROR_INVALID_CATEGORY          117       /* Category for DEVIOCTL in not */
+                                                  /* defined */
+#define ERROR_INVALID_VERIFY_SWITCH     118       /* invalid value passed for */
+                                                  /* verify flag */
+#define ERROR_BAD_DRIVER_LEVEL          119       /* DosDevIOCTL looks for a level */
+                                                  /* four driver.       If the driver */
+                                                  /* is not level four we return */
+                                                  /* this code */
+#define ERROR_CALL_NOT_IMPLEMENTED      120       /* returned from stub api calls. */
+                                                  /* This call will disappear when */
+                                                  /* all the api's are implemented. */
+#define ERROR_SEM_TIMEOUT               121       /* Time out happened from the */
+                                                  /* semaphore api functions. */
+#define ERROR_INSUFFICIENT_BUFFER       122       /* Some call require the  */
+                                          /* application to pass in a buffer */
+                                          /* filled with data.  This error is */
+                                          /* returned if the data buffer is too */
+                                          /* small.  For example: DosSetFileInfo */
+                                          /* requires 4 bytes of data.  If a */
+                                          /* two byte buffer is passed in then */
+                                          /* this error is returned.   */
+                                          /* error_buffer_overflow is used when */
+                                          /* the output buffer in not big enough. */
+#define ERROR_INVALID_NAME              123       /* illegal character or malformed */
+                                                  /* file system name */
+#define ERROR_INVALID_LEVEL             124       /* unimplemented level for info */
+                                                  /* retrieval or setting */
+#define ERROR_NO_VOLUME_LABEL           125       /* no volume label found with */
+                                                  /* DosQFSInfo command */
+#define ERROR_MOD_NOT_FOUND             126       /* w_getprocaddr,w_getmodhandle */
+#define ERROR_PROC_NOT_FOUND            127       /* w_getprocaddr */
+
+#define ERROR_WAIT_NO_CHILDREN          128       /* CWait finds to children */
+
+#define ERROR_CHILD_NOT_COMPLETE        129       /* CWait children not dead yet */
+
+#define ERROR_DIRECT_ACCESS_HANDLE      130       /* handle operation is invalid */
+                                                  /* for direct disk access */
+                                                  /* handles */
+#define ERROR_NEGATIVE_SEEK             131       /* application tried to seek  */
+                                                  /* with negitive offset */
+#define ERROR_SEEK_ON_DEVICE            132       /* application tried to seek */
+                                                  /* on device or pipe */
+/* */
+/* The following are errors generated by the join and subst workers */
+/* */
+#define ERROR_IS_JOIN_TARGET            133
+#define ERROR_IS_JOINED                 134
+#define ERROR_IS_SUBSTED                135
+#define ERROR_NOT_JOINED                136
+#define ERROR_NOT_SUBSTED               137
+#define ERROR_JOIN_TO_JOIN              138
+#define ERROR_SUBST_TO_SUBST            139
+#define ERROR_JOIN_TO_SUBST             140
+#define ERROR_SUBST_TO_JOIN             141
+#define ERROR_BUSY_DRIVE                142
+#define ERROR_SAME_DRIVE                143
+#define ERROR_DIR_NOT_ROOT              144
+#define ERROR_DIR_NOT_EMPTY             145
+#define ERROR_IS_SUBST_PATH             146
+#define ERROR_IS_JOIN_PATH              147
+#define ERROR_PATH_BUSY                 148
+#define ERROR_IS_SUBST_TARGET           149
+#define ERROR_SYSTEM_TRACE              150     /* system trace error */
+#define ERROR_INVALID_EVENT_COUNT       151     /* DosMuxSemWait errors */
+#define ERROR_TOO_MANY_MUXWAITERS       152
+#define ERROR_INVALID_LIST_FORMAT       153
+#define ERROR_LABEL_TOO_LONG            154
+#define ERROR_TOO_MANY_TCBS             155
+#define ERROR_SIGNAL_REFUSED            156
+#define ERROR_DISCARDED                 157
+#define ERROR_NOT_LOCKED                158
+#define ERROR_BAD_THREADID_ADDR         159
+#define ERROR_BAD_ARGUMENTS             160
+#define ERROR_BAD_PATHNAME              161
+#define ERROR_SIGNAL_PENDING            162
+#define ERROR_UNCERTAIN_MEDIA           163
+#define ERROR_MAX_THRDS_REACHED         164
+
+#define ERROR_INVALID_SEGMENT_NUMBER    180
+#define ERROR_INVALID_CALLGATE          181
+#define ERROR_INVALID_ORDINAL           182
+#define ERROR_ALREADY_EXISTS            183
+#define ERROR_NO_CHILD_PROCESS          184
+#define ERROR_CHILD_ALIVE_NOWAIT        185
+#define ERROR_INVALID_FLAG_NUMBER       186
+#define ERROR_SEM_NOT_FOUND             187
+
+/*      following error codes have added  to make the loader error
+        messages distinct
+*/
+
+#define ERROR_EXCEEDED_SYS_STACKLIMIT           188     /* wrw! */
+#define ERROR_INVALID_STARTING_CODESEG          189
+#define ERROR_INVALID_STACKSEG                  190
+#define ERROR_INVALID_MODULETYPE                191
+#define ERROR_INVALID_EXE_SIGNATURE             192
+#define ERROR_EXE_MARKED_INVALID                193
+#define ERROR_BAD_EXE_FORMAT                    194
+#define ERROR_ITERATED_DATA_EXCEEDS_64k         195
+#define ERROR_INVALID_MINALLOCSIZE              196
+#define ERROR_DYNLINK_FROM_INVALID_RING         197
+#define ERROR_IOPL_NOT_ENABLED                  198
+#define ERROR_INVALID_SEGDPL                    199
+#define ERROR_AUTODATASEG_EXCEEDS_64k           200
+#define ERROR_RING2SEGS_MUST_BE_MOVABLE         201     /* wrw! */
+#define ERR_RELOCSRC_CHAIN_OVER_SEGLIM          202     /* wrw! */
+
+#define ERROR_USER_DEFINED_BASE         0xF000
+
+#define ERROR_I24_WRITE_PROTECT         0
+#define ERROR_I24_BAD_UNIT              1
+#define ERROR_I24_NOT_READY             2
+#define ERROR_I24_BAD_COMMAND           3
+#define ERROR_I24_CRC                   4
+#define ERROR_I24_BAD_LENGTH            5
+#define ERROR_I24_SEEK                  6
+#define ERROR_I24_NOT_DOS_DISK          7
+#define ERROR_I24_SECTOR_NOT_FOUND      8
+#define ERROR_I24_OUT_OF_PAPER          9
+#define ERROR_I24_WRITE_FAULT           0x0A
+#define ERROR_I24_READ_FAULT            0x0B
+#define ERROR_I24_GEN_FAILURE           0x0C
+#define ERROR_I24_DISK_CHANGE           0x0D
+#define ERROR_I24_WRONG_DISK            0x0F
+#define ERROR_I24_UNCERTAIN_MEDIA       0x10
+#define ERROR_I24_CHAR_CALL_INTERRUPTED 0x11
+
+#define ALLOWED_FAIL                    0x0001
+#define ALLOWED_ABORT                   0x0002
+#define ALLOWED_RETRY                   0x0004
+#define ALLOWED_IGNORE                  0x0008
+
+#define I24_OPERATION                   0x1
+#define I24_AREA                        0x6
+                                                          /* 01 if FAT */
+                                                          /* 10 if root DIR */
+                                                          /* 11 if DATA */
+#define I24_CLASS                       0x80
+
+
+/* Values for error CLASS */
+
+#define ERRCLASS_OUTRES                 1         /* Out of Resource */
+#define ERRCLASS_TEMPSIT                2         /* Temporary Situation */
+#define ERRCLASS_AUTH                   3         /* Permission problem */
+#define ERRCLASS_INTRN                  4         /* Internal System Error */
+#define ERRCLASS_HRDFAIL                5         /* Hardware Failure */
+#define ERRCLASS_SYSFAIL                6         /* System Failure */
+#define ERRCLASS_APPERR                 7         /* Application Error */
+#define ERRCLASS_NOTFND                 8         /* Not Found */
+#define ERRCLASS_BADFMT                 9         /* Bad Format */
+#define ERRCLASS_LOCKED                 10        /* Locked */
+#define ERRCLASS_MEDIA                  11        /* Media Failure */
+#define ERRCLASS_ALREADY                12        /* Collision with Existing Item */
+#define ERRCLASS_UNK                    13        /* Unknown/other */
+#define ERRCLASS_CANT                   14
+#define ERRCLASS_TIME                   15
+
+/* Values for error ACTION */
+
+#define ERRACT_RETRY                    1         /* Retry */
+#define ERRACT_DLYRET                   2         /* Delay Retry, retry after pause */
+#define ERRACT_USER                     3         /* Ask user to regive info */
+#define ERRACT_ABORT                    4         /* abort with clean up */
+#define ERRACT_PANIC                    5         /* abort immediately */
+#define ERRACT_IGNORE                   6         /* ignore */
+#define ERRACT_INTRET                   7         /* Retry after User Intervention */
+
+/* Values for error LOCUS */
+
+#define ERRLOC_UNK                      1         /* No appropriate value */
+#define ERRLOC_DISK                     2         /* Random Access Mass Storage */
+#define ERRLOC_NET                      3         /* Network */
+#define ERRLOC_SERDEV                   4         /* Serial Device */
+#define ERRLOC_MEM                      5         /* Memory */
diff --git a/v4.0/src/H/INTERNAT.H b/v4.0/src/H/INTERNAT.H
new file mode 100644
index 0000000..0cd839c
--- /dev/null
+++ b/v4.0/src/H/INTERNAT.H
@@ -0,0 +1,30 @@
+/*
+        Data structure for international table
+ */
+
+struct InterTbl
+{
+        unsigned dateform ;     /* Date format                             */
+        char    currsym[5] ;    /* Currency symbol as ASCIZ string         */
+        char    thousp[2] ;     /* Thousands separator as ASCIZ string     */
+        char    decsp[2] ;      /* Decimal   separator as ASCIZ string     */
+        char    datesp[2] ;     /* Date      separator as ASCIZ string     */
+        char    timesp[2] ;     /* Time      separator as ASCIZ string     */
+        unsigned char bits ;    /* Bit field                               */
+        unsigned char numdig ;  /* Number of signifigant decimal digits    */
+        unsigned char timeform ;/* Time format                             */
+        unsigned long casecall ;/* Case mapping call                       */
+        char    datasp[2] ;     /* Data list separator as ASCIZ string     */
+        int     reserv[5] ;     /* RESERVED                                */
+} ;
+
+
+#define DATEFORM_USA    0
+#define DATEFORM_EUROPE 1
+#define DATEFORM_JAPAN  2
+
+#define BITS_CURRENCY   0x0001
+#define BITS_NUMSPC     0x0002
+
+#define TIMEFORM_12     0
+#define TIMEFORM_24     1
diff --git a/v4.0/src/H/JOINTYPE.H b/v4.0/src/H/JOINTYPE.H
new file mode 100644
index 0000000..446bc1f
--- /dev/null
+++ b/v4.0/src/H/JOINTYPE.H
@@ -0,0 +1,87 @@
+
+/*  types.h - basic types
+ */
+
+#define NULL 0
+#define MAXPATHLEN 80           /* JOIN.C               */
+#define MAXARG 80               /* ERRTST.C             */
+#define CURDISK 0x19            /* ERRTST.C             */
+#define GETVERS 0x30            /* MAIN.C               */
+#define GETVARS 0x52            /* SYSVAR.C             */
+#define IOCTL9 0x4409           /* ERRTST.C             */
+#define SwitChr '/'             /* JOIN.C & SUBST.C     */
+#define PathChr '\\'            /* SUBST.C              */
+#define COLON   ':'             /* ERRTST.C             */
+#define BACKSLASH '\\'          /* ERRTST.C             */
+#define ASCNULL '\0'            /* ERRTST.C             */
+
+
+#define     IBMSPACE(c) ((c)==','||(c)==';'||(c)=='='||(c)==0x08||(c)==0x0a)
+#define     IBMBREAK(c) ((c) == '/' || CMDSPACE((c)))
+#define     CMDBREAK(c) IBMBREAK((c))
+#define     CMDSPACE(c) (isspace((c)) || IBMSPACE((c)))
+
+#define         SHIFT(c,v)      {c--; v++;}
+
+/*  The following structure is a UNIX file block that retains information
+ *  about a file being accessed via the level 1 I/O functions.
+ */
+
+struct UFB
+{
+        char    ufbflg ;                /* flags                           */
+        char    ufbtyp ;                /* device type                     */
+        int     ufbfh ;                 /* file handle                     */
+};
+
+#define NUFBS 20                        /* number of UFBs defined          */
+
+/*  UFB.ufbflg definitions      */
+
+#define UFB_OP 0x80                     /* file is open                    */
+#define UFB_RA 0x40                     /* reading is allowed              */
+#define UFB_WA 0x20                     /* writing is allowed              */
+#define UFB_NT 0x10                     /* access file with no translation */
+#define UFB_AP 8                        /* append mode flag                */
+
+/*  UFB.ufbtyp definitions      */
+
+#define D_DISK 0
+#define D_CON 1
+#define D_PRN 2
+#define D_AUX 3
+#define D_NULL 4
+
+#define TRUE    -1
+#define FALSE   0
+
+#define SETFLAG(l,f)    ((l) |= (f))
+#define TESTFLAG(v,f)   (((v)&(f))!=0)
+#define RSETFLAG(l,f)   ((l) &= ~(f))
+
+#define LOW(w)          ((w)&0xFF)
+#define HIGH(w)         LOW((w)>>8)
+#define WORD(h,l)       ((LOW((h))<<8)|LOW((l)))
+
+/* buffer description for findfirst and findnext */
+
+struct findType {
+    char reserved[21];                  /* reserved for start up */
+    char attr;                          /* attribute found */
+    unsigned int time;                  /* time of last modify */
+    unsigned int date;                  /* date of last modify */
+    long length;                        /* file size */
+    char name[13];                      /* asciz file name */
+};
+
+/* attributes */
+#define A_RO    1                       /* read only */
+#define A_H     2                       /* hidden */
+#define A_S     4                       /* system */
+#define A_V     8                       /* volume id */
+#define A_D     16                      /* directory */
+#define A_A     32                      /* archive */
+
+#define A_MOD   (A_RO+A_H+A_S+A_A)      /* changeable attributes */
+
+#define HASATTR(a,v)    TESTFLAG(a,v)   /* true if a has attribute v */
diff --git a/v4.0/src/H/MAKEFILE b/v4.0/src/H/MAKEFILE
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/v4.0/src/H/MAKEFILE
diff --git a/v4.0/src/H/MSGRET.H b/v4.0/src/H/MSGRET.H
new file mode 100644
index 0000000..91a3957
--- /dev/null
+++ b/v4.0/src/H/MSGRET.H
@@ -0,0 +1,66 @@
+/*  */
+/*----------------------------------------------------------------------+
+|                                                                       |
+| This file contains the structures and defines that are needed to use  |
+| the parser from a C program.                                          |
+|                                                                       |
+|                                                                       |
+| Date:         6-19-87                                                 |
+|                                                                       |
++----------------------------------------------------------------------*/
+
+/* Standard reserved DOS handles                                             */
+
+#define stdin           0x00   /*;AN000; Standard Input device handle        */
+#define stdout          0x01   /*;AN000; Standard Output device handle       */
+#define stderr          0x02   /*;AN000; Standard Error Output device handle */
+#define stdaux          0x03   /*;AN000; Standard Auxiliary device handle    */
+#define stdprn          0x04   /*;AN000; Standard Printer device handle      */
+
+#define utility_msg_class 0xff /*;AN000; Utility message type                */
+
+
+/* Sublist Flag Values                                                 */
+
+/* Alignment Indicator                                                 */
+#define sf_left         0x00      /*;AN000; left align                 */
+#define sf_right        0x80      /*;AN000; right align                */
+
+/* Field Type                                                          */
+#define sf_char         0x00      /*;AN000; character                  */
+#define sf_unsbin2d     0x01      /*;AN000; unsigned binary to decimal */
+#define sf_sbin         0x02      /*;AN000; signed binary to decimal   */
+#define sf_unsbin2h     0x03      /*;AN000; unsigned binary to hex     */
+#define sf_date         0x04      /*;AN000; date                       */
+#define sf_time12       0x05      /*;AN000; time 12-hour               */
+#define sf_time24       0x06      /*;AN000; time 24-hour               */
+
+
+/* Data Variable Size                                                  */
+
+#define sf_ch           0x00      /*;AN000; single character           */
+#define sf_asciiz       0x10      /*;AN000; asciiz string              */
+#define sf_word         0x20      /*;AN000; word                       */
+#define sf_dword        0x30      /*;AN000; double word                */
+#define sf_word         0x20      /*;AN000; word                       */
+
+#define sf_mdy2         0x20      /*;AN000; month,day,year (2 digits)  */
+#define sf_mdy4         0x30      /*;AN000; month,day,year (4 digits)  */
+
+#define sf_hhmm         0x00      /*;AN000; hh:mm                      */
+#define sf_hhmmss       0x10      /*;AN000; hh:mm:ss                   */
+#define sf_hhmmsshh     0x20      /*;AN000; hh:mm:ss:hh                */
+
+
+struct m_sublist                    /*;AN000;                            */
+       {                            /*;AN000;                            */
+       BYTE   sub_size;             /*;AN000;                            */
+       BYTE   sub_res;              /*;AN000;                            */
+       WORD   sub_value;            /*;AN000;                            */
+       WORD   sub_value_seg;        /*;AN000;                            */
+       BYTE   sub_id;               /*;AN000;                            */
+       BYTE   sub_flags;            /*;AN000;                            */
+       BYTE   sub_max_width;        /*;AN000;                            */
+       BYTE   sub_min_width;        /*;AN000;                            */
+       BYTE   sub_pad_char;         /*;AN000;                            */
+       };                           /*;AN000;                            */
diff --git a/v4.0/src/H/SUBCALLS.H b/v4.0/src/H/SUBCALLS.H
new file mode 100644
index 0000000..7145704
--- /dev/null
+++ b/v4.0/src/H/SUBCALLS.H
@@ -0,0 +1,462 @@
+/*SCCSID = @(#)subcalls.hwc     10.1 87/05/02*/
+struct CursorData {
+        unsigned cur_start;
+        unsigned cur_end;
+        unsigned cur_width;
+        unsigned cur_attribute;
+        };
+struct KbdStatus {
+        unsigned length;
+        unsigned bit_mask;
+        unsigned turn_around_char;
+        unsigned interim_char_flags;
+        unsigned shift_state;
+        };
+struct KbdTRANS {
+        unsigned char char_code;
+        unsigned char scan_code;
+        unsigned char status;
+        unsigned char nls_shift;
+        unsigned shift_state;
+        unsigned long time;
+        unsigned kbdDDflags;
+        unsigned xlt_flags;
+        unsigned xlt_shift_state;
+        unsigned xlt_rsrv_0;
+        };
+struct KeyData {
+        unsigned char char_code;
+        unsigned char scan_code;
+        unsigned char status;
+        unsigned char nls_shift;
+        unsigned shift_state;
+        unsigned long time;
+        };
+struct ModeData {
+        unsigned length;
+        unsigned char type;
+        unsigned char color;
+        unsigned col;
+        unsigned row;
+        unsigned hres;
+        unsigned vres;
+        };
+struct PVBData {
+        unsigned pvb_size;
+        unsigned long pvb_ptr;
+        unsigned pvb_length;
+        unsigned pvb_rows;
+        unsigned pvb_cols;
+        unsigned char pvb_type;
+        };
+struct PhysBufData {
+        unsigned long buf_start;
+        unsigned long buf_length;
+        unsigned      selectors[2];
+        };
+struct ConfigData {
+        unsigned length ;
+        unsigned adapter_type;
+        unsigned display_type;
+        unsigned long memory_size;
+        };
+struct VIOFONT {
+        unsigned length;
+        unsigned req_type;
+        unsigned pel_cols;
+        unsigned pel_rows;
+        unsigned long font_data;
+        unsigned font_len;
+        };
+struct VIOSTATE {
+        unsigned length;
+        unsigned req_type;
+        unsigned double_defined;
+        unsigned palette0;
+        unsigned palette1;
+        unsigned palette2;
+        unsigned palette3;
+        unsigned palette4;
+        unsigned palette5;
+        unsigned palette6;
+        unsigned palette7;
+        unsigned palette8;
+        unsigned palette9;
+        unsigned palette10;
+        unsigned palette11;
+        unsigned palette12;
+        unsigned palette13;
+        unsigned palette14;
+        unsigned palette15;
+        };
+struct EventInfo {
+        unsigned Mask;
+        unsigned long Time;
+        unsigned Row;
+        unsigned Col;
+        };
+struct NoPointer {
+        unsigned Row;
+        unsigned Col;
+        unsigned Height;
+        unsigned Width;
+        };
+struct PtrImage {
+        unsigned TotLength;
+        unsigned Col;
+        unsigned Row;
+        unsigned ColOffset;
+        unsigned RowOffset;
+        };
+struct PtrLoc {
+        unsigned RowPos;
+        unsigned ColPos;
+        };
+struct QueInfo {
+        unsigned Events;
+        unsigned QSize;
+        };
+struct ScaleFact {
+        unsigned RowScale;
+        unsigned ColScale;
+        };
+struct StartData {
+        unsigned Length;
+        unsigned Related;
+        unsigned FgBg;
+        unsigned TraceOpt;
+        char far * PgmTitle;
+        char far * PgmName;
+        char far * PgmInputs;
+        char far * TermQ;
+        };
+struct StatusData {
+        unsigned Length;
+        unsigned SelectInd;
+        unsigned BindInd;
+        };
+struct KbdStringInLength
+   {
+    unsigned int  Length;
+    unsigned int  LengthB;
+   };
+extern unsigned far pascal KBDREGISTER (
+        char far *,
+        char far *,
+        unsigned long);
+extern unsigned far pascal KBDDEREGISTER (
+        void );
+extern unsigned far pascal KBDCHARIN (
+        struct KeyData far *,
+        unsigned,
+        unsigned );
+extern unsigned far pascal KBDFLUSHBUFFER (
+        unsigned );
+extern unsigned far pascal KBDGETSTATUS (
+        struct KbdStatus far *,
+        unsigned );
+extern unsigned far pascal KBDPEEK (
+        struct KeyData far *,
+        unsigned );
+extern unsigned far pascal KBDSETSTATUS (
+        struct KbdStatus far *,
+        unsigned );
+extern unsigned far pascal KBDSTRINGIN (
+        char far *,
+        struct KbdStringInLength far *,
+        unsigned,
+        unsigned );
+extern unsigned far pascal KBDOPEN (
+        unsigned far * );
+extern unsigned far pascal KBDCLOSE (
+        unsigned );
+extern unsigned far pascal KBDGETFOCUS (
+        unsigned,
+        unsigned );
+extern unsigned far pascal KBDFREEFOCUS (
+        unsigned );
+extern unsigned far pascal KBDGETCP (
+        unsigned long,
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal KBDSETCP (
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal KBDXLATE (
+        struct KbdTRANS far *,
+        unsigned );
+extern unsigned far pascal KBDSETCUSTXT (
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal KBDSYNCH (
+        unsigned );
+extern unsigned far pascal VIOREGISTER (
+        char far *,
+        char far *,
+        unsigned long,
+        unsigned long );
+extern unsigned far pascal VIODEREGISTER (
+        void );
+extern unsigned far pascal VIOGETBUF (
+        unsigned long far *,
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal VIOGETCURPOS (
+        unsigned far *,
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal VIOGETCURTYPE (
+        struct CursorData far *,
+        unsigned );
+extern unsigned far pascal VIOGETMODE (
+        struct ModeData far *,
+        unsigned );
+extern unsigned far pascal VIOGETPHYSBUF (
+        struct PhysBufData far *,
+        unsigned );
+extern unsigned far pascal VIOREADCELLSTR (
+        char far *,
+        unsigned far *,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOREADCHARSTR (
+        char far *,
+        unsigned far *,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOSCROLLDN (
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned,
+        char far *,
+        unsigned );
+extern unsigned far pascal VIOSCROLLUP (
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned,
+        char far *,
+        unsigned );
+extern unsigned far pascal VIOSCROLLLF (
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned,
+        char far *,
+        unsigned );
+extern unsigned far pascal VIOSCROLLRT (
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned,
+        char far *,
+        unsigned );
+extern unsigned far pascal VIOSETCURPOS (
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOSETCURTYPE (
+        struct CursorData far *,
+        unsigned );
+extern unsigned far pascal VIOSETMODE (
+        struct ModeData far *,
+        unsigned );
+extern unsigned far pascal VIOSHOWBUF (
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOWRTCELLSTR (
+        char far *,
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOWRTCHARSTR (
+        char far *,
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOWRTCHARSTRATT (
+        char far *,
+        unsigned,
+        unsigned,
+        unsigned,
+        char far *,
+        unsigned );
+extern unsigned far pascal VIOWRTNATTR (
+        char far *,
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOWRTNCELL (
+        char far *,
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOWRTNCHAR (
+        char far *,
+        unsigned,
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOWRTTTY (
+        char far *,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOSETANSI (
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOGETANSI (
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal VIOPRTSC (
+        unsigned );
+extern unsigned far pascal VIOPRTSCTOGGLE (
+        unsigned );
+extern unsigned far pascal VIOSAVREDRAWWAIT (
+        unsigned,
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal VIOSAVREDRAWUNDO (
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOMODEWAIT (
+        unsigned,
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal VIOMODEUNDO (
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOSCRLOCK (
+        unsigned,
+        unsigned char far *,
+        unsigned );
+extern unsigned far pascal VIOSCRUNLOCK (
+        unsigned );
+extern unsigned far pascal VIOPOPUP (
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal VIOENDPOPUP (
+        unsigned );
+extern unsigned far pascal VIOGETCONFIG (
+        unsigned,
+        struct ConfigData far *,
+        unsigned );
+extern unsigned far pascal VIOGETFONT (
+        struct VIOFONT far *,
+        unsigned );
+extern unsigned far pascal VIOGETCP (
+        unsigned,
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal VIOSETCP (
+        unsigned,
+        unsigned,
+        unsigned );
+extern unsigned far pascal VIOSETFONT (
+        struct VIOFONT far *,
+        unsigned );
+extern unsigned far pascal VIOGETSTATE (
+        struct VIOSTATE far *,
+        unsigned );
+extern unsigned far pascal VIOSETSTATE (
+        struct VIOSTATE far *,
+        unsigned );
+extern unsigned far pascal MOUREGISTER (
+        char far *,
+        char far *,
+        unsigned long );
+extern unsigned far pascal MOUDEREGISTER (
+        void );
+extern unsigned far pascal MOUFLUSHQUE (
+        unsigned );
+extern unsigned far pascal MOUGETHOTKEY (
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal MOUSETHOTKEY (
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal MOUGETPTRPOS (
+        struct PtrLoc far *,
+        unsigned );
+extern unsigned far pascal MOUSETPTRPOS (
+        struct PtrLoc far *,
+        unsigned );
+extern unsigned far pascal MOUGETPTRSHAPE (
+        unsigned char far *,
+        struct PtrImage far *,
+        unsigned );
+extern unsigned far pascal MOUSETPTRSHAPE (
+        unsigned char far *,
+        struct PtrImage far *,
+        unsigned );
+extern unsigned far pascal MOUGETDEVSTATUS (
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal MOUGETNUMBUTTONS (
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal MOUGETNUMMICKEYS (
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal MOUREADEVENTQUE (
+        struct EventInfo far *,
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal MOUGETNUMQUEEL (
+        struct QueInfo far *,
+        unsigned );
+extern unsigned far pascal MOUGETEVENTMASK (
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal MOUSETEVENTMASK (
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal MOUGETSCALEFACT (
+        struct ScaleFact far *,
+        unsigned );
+extern unsigned far pascal MOUSETSCALEFACT (
+        struct ScaleFact far *,
+        unsigned );
+extern unsigned far pascal MOUOPEN (
+        char far *,
+        unsigned far * );
+extern unsigned far pascal MOUCLOSE (
+        unsigned );
+extern unsigned far pascal MOUREMOVEPTR (
+        struct NoPointer far *,
+        unsigned );
+extern unsigned far pascal MOUDRAWPTR (
+        unsigned );
+extern unsigned far pascal MOUSETDEVSTATUS (
+        unsigned far *,
+        unsigned );
+extern unsigned far pascal MOUINITREAL (
+        char far * );
+extern unsigned far pascal DOSSTARTSESSION (
+        struct StartData far *,
+        unsigned far *,
+        unsigned far * );
+extern unsigned far pascal DOSSETSESSION (
+        unsigned,
+        struct StatusData far * );
+extern unsigned far pascal DOSSELECTSESSION (
+        unsigned,
+        unsigned long );
+extern unsigned far pascal DOSSTOPSESSION (
+        unsigned,
+        unsigned,
+        unsigned long );
diff --git a/v4.0/src/H/SYSVAR.H b/v4.0/src/H/SYSVAR.H
new file mode 100644
index 0000000..4ae3094
--- /dev/null
+++ b/v4.0/src/H/SYSVAR.H
@@ -0,0 +1,30 @@
+struct sysVarsType
+{
+        long    pDPB ;          /* pointer to DPB chain                    */
+        long    pSFT ;          /* pointer to System File Table            */
+        long    pClock ;        /* pointer to clock device                 */
+        long    pCon ;          /* pointer to CON device                   */
+        unsigned maxSec ;       /* size of largest physical sector         */
+        long    pBuf ;          /* pointer to buffer cache                 */
+        long    pCDS ;          /* pointer to Current Dirs                 */
+        long    pFCBSFT ;       /* pointer to FCB sftable                  */
+        unsigned cKeep ;        /* number of un-recyclable FCBs            */
+        char    cDrv ;          /* maximum number of physical drives       */
+        char    cCDS ;          /* number of Current Dirs                  */
+#ifdef DOS4
+        long    pDEVHLP ;       /* ptr DOS DevHlp routine                  */
+#endif
+        long    pDEV ;          /* pointer to device list                  */
+        unsigned attrNUL ;      /* attributes of NUL device                */
+        unsigned stratNUL ;     /* strategy entry point of NUL dev         */
+        unsigned intNUL ;       /* interrupt entry point of NUL dev        */
+        char    namNUL[8] ;     /* name of NUL device                      */
+        char    fSplice ;       /* TRUE => splices are in effect           */
+        unsigned ibmdos_size ;  /* ;AN000; size in paragraphs              */
+        long    ifs_doscall ;   /* ;AN000; IFS serv routine entry          */
+        long    ifs ;           /* ;AN000; IFS header chain                */
+        unsigned buffers ;      /* ;AN000; BUFFERS= values (m,n)           */
+        char    boot_drive ;    /* ;AN000; boot drive A=1 B=2...           */
+        char    dwmove ;        /* ;AN000; 1 if 386 machine                */
+} ;
+
\ No newline at end of file
diff --git a/v4.0/src/H/TYPES.H b/v4.0/src/H/TYPES.H
new file mode 100644
index 0000000..446bc1f
--- /dev/null
+++ b/v4.0/src/H/TYPES.H
@@ -0,0 +1,87 @@
+
+/*  types.h - basic types
+ */
+
+#define NULL 0
+#define MAXPATHLEN 80           /* JOIN.C               */
+#define MAXARG 80               /* ERRTST.C             */
+#define CURDISK 0x19            /* ERRTST.C             */
+#define GETVERS 0x30            /* MAIN.C               */
+#define GETVARS 0x52            /* SYSVAR.C             */
+#define IOCTL9 0x4409           /* ERRTST.C             */
+#define SwitChr '/'             /* JOIN.C & SUBST.C     */
+#define PathChr '\\'            /* SUBST.C              */
+#define COLON   ':'             /* ERRTST.C             */
+#define BACKSLASH '\\'          /* ERRTST.C             */
+#define ASCNULL '\0'            /* ERRTST.C             */
+
+
+#define     IBMSPACE(c) ((c)==','||(c)==';'||(c)=='='||(c)==0x08||(c)==0x0a)
+#define     IBMBREAK(c) ((c) == '/' || CMDSPACE((c)))
+#define     CMDBREAK(c) IBMBREAK((c))
+#define     CMDSPACE(c) (isspace((c)) || IBMSPACE((c)))
+
+#define         SHIFT(c,v)      {c--; v++;}
+
+/*  The following structure is a UNIX file block that retains information
+ *  about a file being accessed via the level 1 I/O functions.
+ */
+
+struct UFB
+{
+        char    ufbflg ;                /* flags                           */
+        char    ufbtyp ;                /* device type                     */
+        int     ufbfh ;                 /* file handle                     */
+};
+
+#define NUFBS 20                        /* number of UFBs defined          */
+
+/*  UFB.ufbflg definitions      */
+
+#define UFB_OP 0x80                     /* file is open                    */
+#define UFB_RA 0x40                     /* reading is allowed              */
+#define UFB_WA 0x20                     /* writing is allowed              */
+#define UFB_NT 0x10                     /* access file with no translation */
+#define UFB_AP 8                        /* append mode flag                */
+
+/*  UFB.ufbtyp definitions      */
+
+#define D_DISK 0
+#define D_CON 1
+#define D_PRN 2
+#define D_AUX 3
+#define D_NULL 4
+
+#define TRUE    -1
+#define FALSE   0
+
+#define SETFLAG(l,f)    ((l) |= (f))
+#define TESTFLAG(v,f)   (((v)&(f))!=0)
+#define RSETFLAG(l,f)   ((l) &= ~(f))
+
+#define LOW(w)          ((w)&0xFF)
+#define HIGH(w)         LOW((w)>>8)
+#define WORD(h,l)       ((LOW((h))<<8)|LOW((l)))
+
+/* buffer description for findfirst and findnext */
+
+struct findType {
+    char reserved[21];                  /* reserved for start up */
+    char attr;                          /* attribute found */
+    unsigned int time;                  /* time of last modify */
+    unsigned int date;                  /* date of last modify */
+    long length;                        /* file size */
+    char name[13];                      /* asciz file name */
+};
+
+/* attributes */
+#define A_RO    1                       /* read only */
+#define A_H     2                       /* hidden */
+#define A_S     4                       /* system */
+#define A_V     8                       /* volume id */
+#define A_D     16                      /* directory */
+#define A_A     32                      /* archive */
+
+#define A_MOD   (A_RO+A_H+A_S+A_A)      /* changeable attributes */
+
+#define HASATTR(a,v)    TESTFLAG(a,v)   /* true if a has attribute v */
diff --git a/v4.0/src/H/UTILMID.H b/v4.0/src/H/UTILMID.H
new file mode 100644
index 0000000..01fe0b0
--- /dev/null
+++ b/v4.0/src/H/UTILMID.H
@@ -0,0 +1,506 @@
+/*      SCCSID = @(#)utilmid.h  10.5 87/05/22 */
+
+#define MSG_REC_FILE_NOT_FOUND          2         /* file not found */
+
+#define MSG_DCOMP_INSUFF_MEM            8         /* insufficient storage - diskcomp */
+#define MSG_DCOPY_INSUFF_MEM            8         /* insufficient storage - diskcopy */
+#define MSG_CHK_MEMORY_UNAVAIL          8         /* memory unavailable - chkdsk */
+#define MSG_REST_INSUF_MEM              8         /* insufficient memory */
+#define MSG_BACK_INSUF_MEM              8         /* insufficient mem */
+#define MSG_REC_UNABLE_ALL_MEM          8         /* unable to allocate memory */
+/* 1000 - 1004 basemid */
+/* 1005 not used */
+#define MSG_SORT_INVAL_PARA             1002      /* sort invalid parameter */
+#define MSG_SORT_NOT_ENOUGH_MEMORY      1006      /* sort file size too big */
+/* 1008 not used */
+#define MSG_SORT_READ_ERROR             30        /* error reading from disk/diskette */
+/* 1009 not used */
+#define MSG_SORT_RCD_SIZE_EXCEED        1010      /* record size exceeded */
+/* 1011 - 1014 unused */
+#define MSG_REC_ENT_BEG_REC             1015      /* Press Enter to being recover drive %1 */
+#define MSG_REC_ERROR_DRIVE             1016      /* %1 error %2 drive %3 */
+#define MSG_REC_INVAL_PARAMETER         1001      /* Invalid parameter */
+/* 1018 not used */
+#define MSG_REC_INVAL_DRIVE             1019      /* invalid drive */
+#define MSG_REC_INVAL_DRIVE_FILE        2         /* invalid drive or filename */
+/* 1020 - 1022 */
+#define MSG_REC_BYTES_RECOVERED         1023      /* %1 of %2 bytes recovered */
+#define MSG_REC_WARN_DIR_FULL           1024      /* warning directory full */
+#define MSG_REC_FILES_RECOVERED         1025      /* %1 files recovered */
+#define MSG_REC_TOO_MANY_PARAMETERS     1003      /* Too many parameters entered */
+/* 1026 - 1031 unused */
+#define MSG_REN_INVAL_NUM_PARA          1003      /* Rename invalid number of parameters */
+#define MSG_STRIKE_ANY_KEY              1032      /* press any key when ready */
+#define MSG_DIR_INVALID_DIR             3         /* Dir invalid directory */
+/* 1033 not used */
+#define MSG_COM_SEARCH_DIR_BAD          1034      /* specified command search dir bad */
+#define MSG_REN_INVAL_PATH_FILENAME     1035      /* rename invalid path or filename */
+#define MSG_DATE_INVALID                1036      /* invalid date */
+#define MSG_NO_BAT_LABEL                1039      /* batch label not found */
+#define MSG_DIR_BAD_COMMAND_OR_FILE     1041      /* bad command or filename */
+#define MSG_RMDIR_INVALID_PATH          1042      /* rmdir is bad */
+#define MSG_REN_INVALID_PARAMETER       1003      /* rename invalid parameter */
+/* 1043 not used */
+#define MSG_REN_INVALID_TIME            1044      /* rename invalid time */
+#define MSG_BAD_DOS_VER                 1045      /* CMD and DOS incompat */
+#define MSG_VER_SPEC_ON_OFF             1001      /* verify and break on or off */
+/* 1046 not used */
+#define MSG_COMM_VER                    1047      /* command version 5.0 */
+#define MSG_C                           1048      /* c acknowledgement */
+#define MSG_FILES_COPIED                1049      /* % files copied */
+#define MSG_CURRENT_DATE                1050      /* current date is */
+#define MSG_CURRENT_TIME                1051      /* current time is */
+#define MSG_DOSWRITE_ERROR_TO_DEV       29        /* doswrite error writing to device */
+/* 1052 not used */
+#define MSG_DIR_OF                      1053      /* directory of %1 */
+#define MSG_DIR                         1054      /* dir */
+#define MSG_OUT_OF_ENVIRON_SPACE        1056      /* out of environment space */
+/* 1058 not used */
+#define MSG_EXEC_FAILURE                1059      /* EXEC failure */
+#define MSG_FILES_FREE                  1060      /* %1 files %2 bytes free */
+#define MSG_FILE_CREATION_ERROR         1061      /* file creation error */
+/* 1062 - 1063 not used */
+#define MSG_LINES_TOO_LONG              1065      /* lines too long */
+#define MSG_CONT_LOST_BEF_COPY          1066      /* content of destination lost before */
+#define MSG_INSRT_DISK_BAT              1067      /* insert disk with batch file press key */
+#define MSG_ENTER_NEW_DATE              1068      /* Enter new date */
+#define MSG_SYNERR_NLN                  1003      /* newline */
+/* 1069 not used */
+#define MSG_ENTER_NEW_TIME              1070      /* enter new line */
+#define MSG_RDR_HNDL_CREATE             1071      /* Handle creation error */
+#define MSG_ECHO_OFF                    1074      /* ECHO is off */
+#define MSG_ECHO_ON                     1075      /* ECHO is on */
+#define MSG_VERIFY_OFF                  1076      /* Verify is off */
+#define MSG_VERIFY_ON                   1077      /* Verify is on */
+#define MSG_CANNOT_COPIED_ONTO_SELF     1078      /* message cannot be copied onto self */
+#define MSG_SYNERR_GENL                 1079      /* syntax error general */
+#define MSG_TOP_LEVEL_PROCESS_CAN       1081      /* top level process aborted, cannot con */
+#define MSG_PID_IS                      1082      /* pid is %1 */
+#define MSG_DUP_FILENAME_OR_NOT_FD      1083      /* duplicate filename or file not found */
+#define MSG_ARE_YOU_SURE                1084      /* Are you sure (Y/N)? */
+#define MSG_SET_SYNTAX_ERROR            1003      /* syntax error on set command */
+/* 1085 not used */
+#define MSG_TOKEN_TOO_LONG              1086      /* token too long */
+#define MSG_PROG_TOO_BIG_MEM            8         /* program is too big to fit into memory */
+/* 1087 not used */
+#define MSG_MS_DOS_VERSION              1090      /* cp-dos version %1 %2 */
+#define MSG_PIPE_FAILURE                1092      /* pipeline failure %1 */
+#define MSG_MS_MORE                     1093      /* more? */
+/* 1094 - 1100 unused */
+#define MSG_BAD_VERSION                 1210      /* bad dos version - join */
+#define MSG_JS_INCOR_SYNT               1003      /* bad join syntax */
+/* 1001 not used */
+#define MSG_JOIN_CANNOT_CREAT_DIR       82        /* cannot create directory */
+/* 1102 not used */
+#define MSG_SUBST_CANNOT_ACCPT_DIR      1103      /* cannot accept directory - join */
+#define MSG_JOIN_LIST                   1104      /* join is joined */
+#define MSG_SUBST_LIST                  1105      /* subst is substituted */
+/* 1106 not used */
+#define MSG_REAL_MODE_ONLY              1107      /* app run in real mode only */
+/* 1108 - 1135 unused */
+#define MSG_REP_INCOR_VERSION           1135      /* incorrect dos version replace */
+#define MSG_REP_INCOR_PARA              1002      /* incorrect parameters replace */
+/* 1136 not used */
+#define MSG_REP_SOUR_PATH_REQ           1137      /* source path required replace */
+#define MSG_REP_PARA_NOT_COMP           1003      /* parameters not compatible */
+/* 1138 not used */
+#define MSG_REP_ENTER_ADD_FILE          1139      /* press enter to add file */
+#define MSG_REP_ENTER_REPLACE_FILE      1140      /* press enter replace file */
+#define MSG_REP_NO_FILES_FOUND          1141      /* no files found replace */
+#define MSG_REP_FILE_NOT_COPY_SELF      1078      /* file cannot be copied to self %1 */
+/* 1142 - 1144 not used */
+#define MSG_REP_NOT_FOUND               2         /* file not found %1 */
+#define MSG_REP_PATH_REQ_NOT_FOUND      3         /* path requested not found */
+#define MSG_REP_ACCESS_DENIED           1145      /* access to %1 denied */
+#define MSG_REP_DRIVE                   15        /* drive rep incorrect */
+/* 1146 - 1147 not used */
+#define MSG_REP_NO_FILES_ADDED          1148      /* no files added. */
+#define MSG_REP_FILES_ADDED             1149      /* files %1 added. */
+#define MSG_REP_NO_FILES_REP            1150      /* no files replaced */
+#define MSG_REP_FILES_REP               1151      /* files %1 replaced */
+#define MSG_REP_ADD                     1152      /* add %1 y/n */
+#define MSG_REP_FILES                   1153      /* want to replace %1 */
+#define MSG_REP_ADDING_FILES            1154      /* adding %1 files */
+#define MSG_REP                         1155      /* replacing %1 files */
+/* 1156 - 1160 unused */
+#define MSG_COMP_COMPARE_MORE           1161      /* compare more files */
+#define MSG_COMP_ENTER_FILE_1ST         1162      /* enter primary filename */
+#define MSG_COMP_ENTER_FILE_2ND         1163      /* enter 2nd filename or drive letter */
+#define MSG_COMP_COMPARE_OK             1164      /* files compare ok */
+#define MSG_COMP_END_COMPARE            1165      /* 10 mismatches ending compare */
+#define MSG_COMP_FILE2_BYTE             1166      /* file2 = %0 */
+#define MSG_COMP_FILE1_BYTE             1167      /* file 1 = %0 */
+#define MSG_COMP_FILE_OFFSET            1168      /* compare error at offset %0 */
+#define MSG_COMP_LENGTH_MISMATCH        1169      /* files are different sizes */
+#define MSG_COMP_1ST_2ND_FILENAMES      1170      /* %1 and %2 */
+#define MSG_COMP_INVALID_PATH           1171      /* invalid path */
+#define MSG_COMP_FILE_NOT_FOUND         1490      /* %1 file not found */
+#define MSG_COMP_INVALID_DRIVE          15        /* invalid drive */
+#define MSG_COMP_INVALID_DOSVER         1210      /* invalid dos version */
+/* 1172 - 1179 unused */
+#define MSG_MOUSE_PARA_MOD              1180      /* parameters modified */
+#define MSG_MOUSE_NOT_LOADED            1181      /* mouse device driver version not load */
+#define MSG_MOUSE_LOADED                1183      /* mouse loaded */
+#define MSG_XCOPY_ITSELF                1184      /* cannot copy itself */
+#define MSG_XCOPY_INTERNAL_ERROR        1185      /* internal error */
+#define MSG_XCOPY_NO_OPEN_SOURCE        1186      /* no source open */
+#define MSG_XCOPY_NO_OPEN_TARGET        1187      /* no target open */
+#define MSG_XCOPY_NO_READ_SOURCE        1186      /* no read source */
+/* 1188 not used */
+#define MSG_XCOPY_NO_CLOSE_SOURCE       1189      /* close source */
+#define MSG_XCOPY_NO_CLOSE_TARGET       1189      /* no close target */
+/* 1190  - 1191 not used */
+#define MSG_XCOPY_NO_WRITE_TARGET       1187      /* no write target */
+#define MSG_XCOPY_NO_ACCESS_SOURCE      1192      /* no access source */
+#define MSG_XCOPY_NO_ACCESS_TARGET      1192      /* no access target */
+/* 1193 not used */
+#define MSG_XCOPY_INVALID_DATE          1036      /* invalid date */
+/* 1194 - 1207 basemid */
+#define MSG_ENTER_JAPAN_DATE            1208      /* enter the new date yy-mm-dd */
+#define MSG_ENTER_DEF_DATE              1209      /* enter the new date dd-mm-yy */
+#define MSG_INCORRECT_DOSVER            1210      /* incorrect dos version */
+#define MSG_SAD_INV_DOS                 1210      /* invalid dos version - created */
+#define MSG_STCP_INV_DOS                1210      /* trace only in >= dos  - trace */
+#define MSG_INVALID_DOS_PRINT           1210      /* incorrect dos version */
+#define MSG_TREE_INV_DOSVER             1210      /* incorrect DOS version */
+#define MSG_INVAL_DOS_VERSION           1210      /* invalid DOS version */
+#define MSG_REST_INVAL_VERS             1210      /* invalid dos version not 1.0 */
+#define MSG_BACK_INCOR_DOS_VER          1210      /* inval dos ver */
+#define MSG_REP_INCOR_DOS_VERSION       1210      /* incorrect dos version replace */
+#define MSG_ABORT_RETRY_IGNORE          1211      /* abort, retry, or ignore */
+#define MSG_REC_ABORT_RETRY_IGNORE      1211      /* abort, retry, ignore */
+#define MSG_PRESS_ANY_KEY               1212      /* press any key when ready */
+/* 1213 - 1215 not used */
+#define MSG_DCOMP_INV_PARM              1001      /* invalid parameter - diskcomp */
+/* 1230 not used */
+#define MSG_DCOMP_INV_DRIVE             1231      /* invalid drive - diskcomp */
+#define MSG_DCOPY_INV_DRV               1231      /* invalid drive - diskcopy */
+#define MSG_DCOMP_INSERT_FIRST          1232      /* insert first disk - diskcomp */
+#define MSG_DCOPY_INSERT_SRC            1232      /* insert source disk - diskcopy */
+#define MSG_DCOMP_INSERT_SECOND         1233      /* insert second disk - diskcomp */
+#define MSG_DCOPY_INSERT_TARG           1233      /* insert target disk - diskcopy */
+#define MSG_DCOMP_DISK1_BAD             1234      /* first disk bad - diskcomp */
+#define MSG_DCOMP_DISK2_BAD             1235      /* second disk bad - diskcomp */
+/* 1236 - 1237 not used */
+#define MSG_DCOMP_REPEAT_COMP           1238      /* compare another? - diskcomp */
+#define MSG_DCOMP_COMPARING             1239      /* comparing ...  - diskcomp */
+#define MSG_DCOMP_DRV_INCOMPAT          1240      /* drive incompatible - diskcomp */
+#define MSG_DCOPY_COPYING               1240      /* copying ...  - diskcopy */
+#define MSG_DCOMP_COMPARE_ERROR         1242      /* compare error - diskcomp */
+/* 1243 not used */
+#define MSG_DCOMP_COMPARE_ENDED         1244      /* compare ended - diskcomp */
+#define MSG_DCOMP_COMPARE_OK            1245      /* compare ok - diskcomp */
+#define MSG_DCOMP_ENTER_SRC             1246      /* source drive letter - diskcomp/copy */
+#define MSG_DCOMP_ENTER_TARG            1247      /* target drive letter - diskcomp/copy */
+/* 1248 not used */
+#define MSG_DCOPY_FORMATTING            1252      /* copying while formatting - diskcopy */
+#define MSG_DCOPY_TARG_NOUSE            1255      /* target disk possibly bad - diskcopy */
+/* 1256 not used */
+#define MSG_DCOPY_COPY_ANOTHER          1259      /* copy another?  - diskcopy */
+#define MSG_DCOPY_COPY_TRACKS           1260      /* copy tracks */
+/* 1261 - 1262 not used */
+#define MSG_DCOPY_READ_ERROR            1264      /* read error - diskcopy */
+#define MSG_DCOPY_UNREC_RDERR           1265      /* unrecoverable read error - diskcopy */
+#define MSG_DCOPY_COPY_ENDED            1266      /* copy ended - diskcopy */
+/* 1267 - 1269 not used */
+#define MSG_FMT_INS_NEW_DISK            1270      /* insert new disk - format */
+#define MSG_FMT_DISK_WARNING            1271      /* fixed disk warning - format */
+#define MSG_FMT_SYS_XFERED              1272      /* system transferred - format */
+#define MSG_FMT_ANOTHER                 1273      /* format another - format */
+#define MSG_FMT_INV_VOLUME              123       /* invalid volume name - format */
+/* 1274 - 1275 not used */
+#define MSG_FMT_INV_PARAMETER           1276      /* invalid parameter - format */
+#define MSG_FMT_REINSERT_DISK           1277      /* reinsert target disk - format */
+#define MSG_FMT_INSERT_DOS              1278      /* reinsert system disk - format */
+#define MSG_FMT_FORMAT_FAIL             1279      /* format failure - format */
+#define MSG_FMT_DISK_UNSUIT             1280      /* disk unsuitable for system - format */
+#define MSG_FMT_INV_MEDIA               1281      /* invalid media - format */
+#define MSG_FMT_INSUFF_STORAGE          8         /* insufficient storage - format */
+/* 1282 not used */
+#define MSG_FMT_DISK_SPACE              1283      /* disk space available - format */
+#define MSG_FMT_BYTES_USED              1284      /* bytes used - format */
+#define MSG_FMT_BYTES_BAD               1285      /* bytes in bad sectors - format */
+#define MSG_FMT_BYTES_AVAIL             1286      /* bytes available - format */
+#define MSG_FMT_VOLUME_PROMPT           1288      /* enter volume name - format */
+/* 1289 not used */
+#define MSG_FMT_NO_SYS_TRANS            1290      /* system cannot transfer */
+#define MSG_FMT_DOS_DISK_ERR            1291      /* dos disk error - format */
+#define MSG_FMT_NONSYS_DISK             1292      /* non-system disk - format */
+/* 1283 not used */
+#define MSG_FMT_COMPLETE                1294      /* format complete - format */
+#define MSG_FMT_WP_VIOLATION            1295      /* write protect violation - format */
+#define MSG_FMT_NO_WRITE_BOOT           1296      /* unable to write boot - format */
+#define MSG_FMT_INCOMPAT_DISK           1297      /* incompatible parms for disk - format */
+#define MSG_FMT_PARM_INCOMPAT           1298      /* incompatible parameter - format */
+#define MSG_FMT_DRV_NOT_READY           1299      /* drive not ready - format */
+/* 1300 - 1301 not used */
+#define MSG_FMT_HEAD_CYL                1302      /* head/cylinder - format */
+#define MSG_FMT_NOT_SUPPORTED           1303      /* format not supported - format */
+/* 1304 - 1306 not used */
+#define MSG_FMT_FAT_ERROR               1307      /* error writing fat - format */
+#define MSG_FMT_DIR_WRTERR              1308      /* error writing directory - format */
+#define MSG_FMT_DRIVE_LETTER            1310      /* drive letter must be specified */
+#define MSG_FMT_SYS_FILES               1311      /* cannot find system files - format */
+/* 1312 not used */
+#define MSG_FMT_BAD_PARTITION           1313      /* bad partition table - format */
+/* 1314 not used */
+#define MSG_FMT_UNSUPP_PARMS            1316      /* parameters not supported - format */
+#define MSG_FMT_WHAT_IS_VOLID           1318      /* enter current volume label for dr %1 */
+#define MSG_FMT_BAD_VOLID               1319      /* incorrect volume label for drive %1 */
+#define MSG_FMT_TBL_ERR                 1320      /* format.tbl missing or an error */
+#define MSG_FMT_TRANSFER                1321      /* format transferred */
+#define MSG_FMT_DEFAULT_PARM            1322      /* default parameters /n or /t */
+#define MSG_CHK_REAL_MODE_MEM_RPT       1327      /* real mode memory report */
+#define MSG_CHK_NON_CONT_BLOCKS         1328      /* non-contig blocks */
+#define MSG_CHK_SPEC_FILE_CONT          1329      /* specified files are contig */
+#define MSG_CHK_INVALID_PARM            1330      /* invalid parameter - chkdsk */
+#define MSG_CHK_DISK_OPEN_ERR           1331      /* cannot open disk error - chkdsk */
+#define MSG_CHK_DISK_LOCK_ERR           1332      /* cannot lock disk error - chkdsk */
+#define MSG_CHK_INVALID_DRIVE           1333      /* invalid drive specification - chkdsk */
+#define MSG_CHK_FAT_READ                1336      /* error reading FAT - chkdsk */
+#define MSG_CHK_FAT_WRITE               1337      /* error writing FAT - chkdsk */
+#define MSG_CHK_DIRECTORY               1338      /* directory - chkdsk */
+#define MSG_CHK_NO_SLASHF               1339      /* errors found, no /F - chkdsk */
+#define MSG_CHK_INV_CLUSTER             1340      /* invalid cluster - chkdsk */
+#define MSG_CHK_INV_CURDIR              1341      /* invalid current dir - chkdsk */
+#define MSG_CHK_ALLOC_ERR               1342      /* allocation error - chkdsk */
+#define MSG_CHK_CROSSLINK               1343      /* files cross linked - chkdsk */
+#define MSG_CHK_1ST_CLUSTER             1344      /* first cluster bad - chkdsk */
+#define MSG_CHK_UNREC_DIRERR            1345      /* unrecoverable dir error - chkdsk */
+#define MSG_CHK_CONVERT                 1346      /* conver directory? - chkdsk */
+#define MSG_CHK_DIR_EMPTY               1347      /* directory empty - chkdsk */
+#define MSG_CHK_INV_SUBDIR              1349      /* invalid subdirectory - chkdsk */
+#define MSG_CHK_NO_REC_DOT              1350      /* can't recover . entry - chkdsk */
+#define MSG_CHK_NO_REC_DOTDOT           1351      /* can't recover .. entry - chkdsk */
+#define MSG_CHK_BAD_LINK                1352      /* bad link - chkdsk */
+#define MSG_CHK_BAD_ATTRIB              1352      /* bad file attribute - chkdsk */
+#define MSG_CHK_BAD_SIZE                1352      /* bad file size - chkdsk */
+/* 1353 - 1354 not used */
+#define MSG_CHK_NOT_EXIST               1355      /* file does not exist - chkdsk */
+#define MSG_CHK_LOST_CLUSTERS           1356      /* lost clusters - chkdsk */
+#define MSG_CHK_SPACE_FREED             1358      /* space freed - chkdsk */
+#define MSG_CHK_SPACE_POSSIBLE          1359      /* space available - chkdsk */
+#define MSG_CHK_NOROOM_ROOT             1360      /* no room in root - chkdsk */
+#define MSG_CHK_DISK_TOTAL              1361      /* total space on disk - chkdsk */
+#define MSG_CHK_BAD_SECTORS             1362      /* bad sectors - chkdsk */
+#define MSG_CHK_HIDDEN_TOTAL            1363      /* hidden file total - chkdsk */
+#define MSG_CHK_DIR_TOTAL               1364      /* directory total - chkdsk */
+#define MSG_CHK_FILE_TOTAL              1365      /* file total - chkdsk */
+#define MSG_CHK_RECOVER_TOTAL           1366      /* recovered total - chkdsk */
+#define MSG_CHK_BYTES_POSSIBLE          1367      /* bytes possible - chkdsk */
+#define MSG_CHK_BYTES_AVAIL             1368      /* bytes available - chkdsk */
+#define MSG_CHK_PROCESS_STOP            1373      /* can't continue - chkdsk */
+#define MSG_CHK_FAT_BAD                 1374      /* bad fat - chkdsk */
+#define MSG_CHK_VOL_CREATE              1375      /* can't create volume - chkdsk */
+#define MSG_CHK_ERR_WRITE_DIR           1376      /* can't write directory - chkdsk */
+#define MSG_CHK_ROOT_BAD_DRV            1377      /* root directory bad - chkdsk */
+#define MSG_CHK_NON_DOS                 1379      /* probable non-dos disk - chkdsk */
+#define MSG_CHK_ERR_READ_DIR            1380      /* can't read dir - chkdsk */
+#define MSG_SAD_DUMPING                 1381      /* dump in process */
+#define MSG_SAD_INSERT_NEXT             1382      /* current dump diskette filled */
+#define MSG_SAD_DISK_ERROR              1383      /* error with diskette, insert another */
+#define MSG_SAD_REINSERT                1384      /* insert dump diskette #1 */
+#define MSG_SAD_DISK_OVERWRITE          1385      /* disk will be overwritten - created */
+#define MSG_SAD_API_ERR                 1386      /* api error - createdd */
+#define MSG_SAD_INV_DRIVE               15        /* invalid drive parm - createdd */
+#define MSG_SAD_USED_ONCE               1388      /* dump data is already on the diskette */
+#define MSG_SAD_HIGH_CAPACITY           1389      /* high capacity diskette */
+#define MSG_SAD_PRO_TERM_USER           1390      /* progm is end by user - createdd */
+#define MSG_SAD_COMPLETE                1391      /* dump complete remove and reboot */
+#define MSG_SAD_NOT_CONTIG              1392      /* not enough contiguous - createdd */
+#define MSG_SAD_MEM_RANGE               1393      /* memory address ranges on this disk ar */
+/* 1395 basemid */
+#define MSG_SAD_INSERT_NEW              1396      /* insert new dump disk - rascrv */
+#define MSG_STCP_NOT_EXIST              1397      /* sys trace does not exist - trace */
+#define MSG_STCP_INV_ON_OFF             1399      /* invalid or missing on/off - trace */
+#define MSG_STCP_EC_RANGE               1400      /* out of range event code - trace */
+#define MSG_STCP_EC_INVALID             1401      /* event codes invalid - trace */
+/* 1402 - 1405 not used */
+#define MSG_DFMT_ENTER                  1406      /* enter to continue - dumpfmtr */
+/* 1407 - 1424 not used */
+#define MSG_SAD_INS_PROPER              31        /* diskette error, ensure diskette inser */
+#define MSG_SAD_WRITE_PROTECT           19        /* diskette error, write protect tab */
+#define MSG_SPOOL_WTRUNC_ERROR          1425      /* cannot release filling file - print */
+#define MSG_SPOOL_OPEN_ERROR            1426      /* cannot delete filling file - print */
+#define MSG_SPOOL_SIG_ERROR             1427      /* cannot delete printing file - print */
+#define MSG_SPOOL_MACH_ERROR            1428      /* cannot hold filling file - print */
+#define MSG_SPOOL_RUN_PRINT_DATA        1429      /* spool running with print data redir */
+#define MSG_SPOOL_RUN_DEVICE            1430      /* spool print run on device */
+#define MSG_SPOOL_INV_PARA              1001      /* spooler invalid parameter */
+#define MSG_SPOOL_INV_DEVICE            15        /* spool invalid device */
+/* 1431 - 1432  not used */
+#define MSG_SPOOL_INV_INPAR             1433      /* spool inval input device para */
+#define MSG_SPOOL_INV_OUTPAR            1434      /* spool inval output device para */
+
+#define MSG_SPOOL_INV_DIRPARM           1435      /* spool inval subdirectory */
+#define MSG_SPOOL_INT_ERROR             8         /* spool internal error */
+/* 1436 not used */
+#define MSG_SPOOL_DISK_FULL             1437      /* spool disk full */
+#define MSG_SPOOL_CURR_CAN_OPER         1438      /* spooler current cancelled by operator */
+#define MSG_SPOOL_ALL_CAN_OPER          1439      /* spooler cancelled by operator */
+/* 1440 not used */
+#define MSG_SPOOL_SHAR_VIOLAT           1441      /* spool share violation */
+#define MSG_SPOOL_ALREADY_RUN           1442      /* spool is already running for device */
+#define MSG_SPOOL_DISK_IS_FULL          112       /* spool disk is full action different */
+/* 1443 - 1455 not used */
+#define MSG_SPOOL_DK_FULL               1437      /* spool disk is full action different */
+#define MSG_SYS_NO_ROOM                 1456      /* no room for system on disk - sys */
+#define MSG_SYS_BAD_TRANS               1457      /* could not transfer files - sys */
+#define MSG_SYS_NO_SYSTEM               1458      /* no system on default drive - sys */
+#define MSG_SYS_TARGET_DRIVE_IN_USE     21        /* drive in use by another process -sys */
+#define MSG_SYS_INTERNAL_ERROR          1459      /* internal error in sys -sys */
+/* 1460 not used */
+#define MSG_SYS_INV_PARM                1460      /* invalid parameter - sys */
+#define MSG_SYS_INV_DRIVE               1461      /* invalid drive - sys */
+#define MSG_SYS_TRANSFERRED             1272      /* system transferred - sys */
+#define MSG_FDISK_INV_PART_TABLE        1462      /* invalid partition table */
+#define MSG_FDISK_ERR_LOADING_OS        1463      /* error loading operating system */
+#define MSG_FDISK_ERR_MISSING_OS        1464      /* missing operating system */
+#define MSG_VDISK_INV_PARM              1465      /* invalid parameter - vdisk */
+#define MSG_VDISK_INSUFF_MEM            1466      /* insufficient memory - vdisk */
+#define MSG_VDISK_REPORT                1467      /* vdisk summary - vdisk */
+#define MSG_SES_MGR_TERM                1468      /* session manager terminate ignore */
+#define MSG_SES_MGR_MENU                1469      /* session manager menu */
+/* */
+/* 1470-1474 are for swapper and are in basemid.inc */
+/* */
+#define MSG_TREE_INV_PARM               1001      /* invalid parameter */
+/* 1475  - 1477 not used */
+#define MSG_TREE_INV_DRIVE              15        /* invalid drive specification */
+#define MSG_TREE_INV_PATH               1478      /* invalid path */
+#define MSG_TREE_TOP_HEADER             1479      /* DIRECTORY PATH LISTING */
+#define MSG_TREE_PATHNAME               1480      /* Path: %1 */
+#define MSG_TREE_SUBDIR_HEADER          1481      /* Sub-directories:  %1 */
+#define MSG_TREE_FILE_HEADER            1482      /* Files:            %1 */
+#define MSG_TREE_NONE_FILE              1483      /* Files:            None */
+#define MSG_TREE_NONE_SUBDIR            1484      /* Sub-directories:  None */
+#define MSG_TREE_FILENAME               1485      /*                   %1 */
+#define MSG_TREE_NO_SUBDIR_EXIST        1486      /* subdirectory does not exist */
+#define MSG_HELP_BAD_MID                1487      /* Invalid message id */
+#define MSG_HELP_MID_LARGE              1488      /* Message id too large */
+#define MSG_HELP_SYNTAX                 1489      /* Syntax error */
+#define MSG_FIND_FILE_NOT_FOUND         1490      /* FIND file not found %1 */
+#define MSG_SYNTAX_ERR_FIND             1003      /* FIND syntax error */
+#define MSG_INVALID_P_NUM               1003      /* invalid number of parameters */
+/* 1491 - 1492 not used */
+#define MSG_HELP_NO_HELP                1493      /* No help available */
+#define MSG_READ_ERROR_FIND             31        /* FIND read error */
+/* 1494 - 1496 not used */
+#define MSG_INVALID_PARM_FIND           1002      /* FIND invalid parameter */
+#define MSG_PATH_NOT_FIND               3         /* path not found */
+/* 1497 - 1499 not used */
+#define MSG_VDISK_NO_DRIVES             1505      /* no drive letters for vdisk */
+/* 1506 - 1508 unused */
+#define MSG_INVALID_DR_LABEL            15        /* invalid drive specification %1 */
+/* 1509- 1511 unused */
+#define MSG_INVALID_LABEL               123       /* inval charact. in volume label */
+/* 1512 - 1513 unused */
+#define MSG_HAS_NO_LABEL                1514      /* volume in drive x has no label */
+#define MSG_GET_NEW_LABEL               1515      /* volume label (11 char) ent for none % */
+#define MSG_DR_VOL_LABEL                1516      /* volume in drive X is */
+/* 1517 - 1523 in basemid.inc */
+#define MSG_PRINT_INV_PARM              1525      /* invalid command line parameter */
+#define MSG_PRINT_TOO_MANY              1526      /* too many command line param entered */
+/* 1528 not used */
+#define MSG_PRINT_INV_DEVICE            1529      /* invalid printer device */
+#define MSG_PRINT_WRITE_ERROR           28        /* error occurred on the printer */
+/* 1530 not used */
+#define MSG_PRINT_NO_SPOOL              1531      /* spooler not running */
+#define MSG_PRINT_REAL_MODE             1532      /* spooler runs only in protect mode */
+#define MSG_PRINT_FILE_NOT_FOUND        1533      /* file not found */
+#define MSG_FDISK_MAIN_INTRO            1534      /* fdisk setup */
+#define MSG_FDISK_MAIN_MENU             1535      /* FDISK options */
+#define MSG_FDISK_MAIN_NEXTFDISK        1536      /* 5. Select next fixed disk drive */
+#define MSG_FDISK_MAIN_PROMPT           1537      /* Enter choice: */
+#define MSG_FDISK_CHANGE_CANTACT        1538      /* table partition can't be made active */
+#define MSG_FDISK_CHANGE_CURACT         1539      /* current active partition is %1 */
+#define MSG_FDISK_CHANGE_DONE           1540      /* partition %1 made active */
+#define MSG_FDISK_CHANGE_NOPART         1541      /* No partitions to make active */
+#define MSG_FDISK_CHANGE_1PART          1542      /* Partition 1 is already active */
+#define MSG_FDISK_CHANGE_PROMPT         1543      /* Enter the number of the partition you */
+#define MSG_FDISK_CHANGE_TITLE          1544      /* change active partition */
+#define MSG_FDISK_CREATE_DONE           1545      /* DOS partition created */
+#define MSG_FDISK_CREATE_NOSPACE        1546      /* No space for a %1 partition */
+#define MSG_FDISK_CREATE_NOSPATHE       1547      /* No space for %1 cylinder at cyl%2 */
+#define MSG_FDISK_CREATE_NOSPAFDOS      1548      /* No space to create a DOS partition */
+#define MSG_FDISK_CREATE_PARTEXISTS     1549      /* fixed disk already has a dos partit */
+#define MSG_FDISK_CREATE_SIZEPROMPT     1550      /* Enter partition size... */
+#define MSG_FDISK_CREATE_SPACEAT        1551      /* Max avail space is %1 cyl at %2. */
+#define MSG_FDISK_CREATE_STARTPROMP     1552      /* enter starting cylinder number... */
+#define MSG_FDISK_CREATE_TITLE          1553      /* create DOS partition */
+#define MSG_FDISK_CREATE_WHOLEDISK      1554      /* Do you want to use the entire fd y/n */
+#define MSG_FDISK_DELETE_DONE           1555      /* DOS partition deleted */
+#define MSG_FDISK_DELETE_NOPART         1556      /* No DOS partition to delete */
+#define MSG_FDISK_DELETE_PROMPT         1557      /* Warning! Data in the DOS part lost */
+#define MSG_FDISK_DELETE_TITLE          1558      /* Delete DOS partition yn */
+#define MSG_FDISK_DISPLAY_FDISKSIZE     1559      /* Total disk space is %1 cylinders. */
+#define MSG_FDISK_DISPLAY_NOPARTS       1560      /* No partitions defined */
+#define MSG_FDISK_DISPLAY_PARTINFO      1561      /* Partition status type start endsize */
+#define MSG_FDISK_DISPLAY_TITLE         1562      /* Display partition information */
+#define MSG_FDISK_ERR_INVALIDNUMBER     1563      /* %1 is not a choice.  Please enter a c */
+#define MSG_FDISK_ERR_INVALIDYN         1564      /* %1 is not a choice.  Please enter yn */
+#define MSG_FDISK_ERR_NOFDISKS          1565      /* no fixed disks present */
+#define MSG_FDISK_ERR_READ              1566      /* error reading fixed disk */
+#define MSG_FDISK_ERR_WRITE             1567      /* error writing fixed disk */
+#define MSG_FDISK_CURRENTDISK           1568      /* current fixed disk drive %1 */
+#define MSG_FDISK_PRESSESC              1569      /* press esc to return to fdisk options */
+#define MSG_FDISK_MUST_RESTART          1570      /* must restart */
+#define MSG_FDISK_IN_USE                1571      /* fixed disk in use */
+/* 1572 - 1574 unused */
+#define MSG_PATCH_INV_NUM_PARMS         1575      /*invalid number of parameters */
+#define MSG_PATCH_INV_PARM              1575      /* invalid parameter %1%2 */
+/* 1576 not used */
+#define MSG_PATCH_NO_CTL                1490      /* cannot open patch control file %1 */
+#define MSG_PATCH_NO_EXE_FILE           1490      /* cannot open %1 to patch */
+/* 1577 - 1578 not used */
+#define MSG_PATCH_PATCHING              1579      /* patching %1 */
+#define MSG_PATCH_CONTINUE              1580      /* continue patching %1? Y/N */
+#define MSG_PATCH_NO_PATCHES            1581      /* No patches applied */
+#define MSG_PATCH_PATCHES_ENTERED       1582      /* Patches entered for %1 */
+#define MSG_PATCH_OK_TO_PATCH           1583      /* should these patches be appl to %1? */
+#define MSG_PATCH_APPLIED               1584      /* patches applied to %1 */
+#define MSG_PATCH_NOT_APPLIED           1585      /* No patches applied to %1 */
+#define MSG_PATCH_CURRENT_EOF           1586      /* Current end of file is at %1 */
+#define MSG_PATCH_OFFSET_PROMPT         1587      /* enter offset in hex of patch > */
+#define MSG_PATCH_PAST_EOF_INT          1588      /* offset is past end of file */
+#define MSG_PATCH_CANT_ALLOC            1589      /* Insufficient memory to save pat inf */
+#define MSG_PATCH_NO_FILE               1590      /* no file to patch fond in pat con %1 */
+#define MSG_PATCH_INV_CMD_COMBO         1591      /* %1 command found without a %2 cmd */
+#define MSG_PATCH_INV_OFFSET            1592      /* %1 is not a valid offset for file %2 */
+#define MSG_PATCH_INV_BYTES             1593      /* %1 is not a valid %2 byte stg for%3 */
+#define MSG_PATCH_TOO_NEAR_EOF          1594      /* offset %1 for %2 too near orpst%3%4 */
+#define MSG_PATCH_VERIFY_FAILED         1595      /* verification failed for %1 */
+/* 1596 not used */
+#define MSG_PATCH_PAST_EOF_AUTO         1597      /* ofst given %1 ofr %2 eof %3 */
+#define MSG_PATCH_UNKNOWN_CMD           1598      /* unknown command */
+#define MSG_PATCH_CANT_APPEND           1599      /* cannot append */
+#define MSG_PATCH_NO_REQUEST            1600      /* no patch request specified */
+#define MSG_MODE_INVAL_PARMS            1601      /* invalid number of parameters */
+#define MSG_MODE_CPL_SET                1602      /* characters per line has been set */
+#define MSG_MODE_LPI_SET                1603      /* lines per inch have been set */
+#define MSG_MODE_INF_RET_SET            1604      /* infinite has been set */
+#define MSG_MORE                        1605      /* -- More -- */
+#define MSG_MODE_INF_RET_RESET          1606      /* infinite retry reset */
+#define MSG_MODE_DEVICE_NAME            1607      /* invalid device name */
+#define MSG_PRINT_ERROR                 29        /* printer error */
+/* 1608 not used */
+#define MSG_MODE_ASYNC_SET              1609      /* async protocol set */
+/* 1610 not used */
+#define MSG_MODE_NO_REDIR               1611      /* mode cannot direct output */
+/* 1612 not used */
+#define MSG_INVALID_PARITY              1613      /* open parity */
+#define MSG_INVALID_DATABITS            1614      /* invalid databits */
+#define MSG_INVALID_STOPBITS            1615      /* invalid stopbits */
+#define MSG_INVALID_BAUD_RATE           1616      /* invalid baud rate */
+#define MSG_INVALID_CHAR_PER_LINE       1617      /* invalid characters per line */
+#define MSG_INVALID_LINES_PER_INCH      1618      /* invalid lines per inch */
+#define MSG_INVALID_SYNTAX              1601      /* invalid syntax */
+/* 1619 - 1621 not used */
+#define MSG_MODE_OUT_RANGE              1622      /* mode out of range */
+#define MSG_MODE_INV_PARM               1601      /* invalid parameter */
+/* 1623 - 1625 unused */
+#define MSG_INVAL_PARAMETER             1002      /* invalid parameter attrib */
+#define MSG_FILEN_REQUIRED              2         /* filename required attrib */
+/* 1626 - 1627 unused */
+#define MSG_UNEX_DOS_ERROR              1628      /* unexpected dos error */
+/* 1629 - 1633 unused */
diff --git a/v4.0/src/H/UTILMID2.H b/v4.0/src/H/UTILMID2.H
new file mode 100644
index 0000000..6439848
--- /dev/null
+++ b/v4.0/src/H/UTILMID2.H
@@ -0,0 +1,208 @@
+/*      SCCSID = @(#)utilmid2.h 5.18 87/05/05 */
+
+#define MSG_REST_FILE_FROM              1634      /* restore file from % 1 %2 */
+#define MSG_INS_BACKUP_DISK             1635      /* insert backup %1 in drive %2 */
+#define MSG_REST_DISK_OUT_SEQ           1636      /* diskette out of seq press key */
+#define MSG_REST_FILE_READ              1637      /* Warning file %1 read only */
+#define MSG_REST_CHNG_REPL              1638      /* file was changed after backup */
+#define MSG_REST_SYS                    1639      /* system files restored */
+#define MSG_REST_FILE_BACKUP            1640      /* files were backed up */
+#define MSG_REST_FILENAME               1641      /* filename restored */
+#define MSG_REST_SOUR_TARG_SAME         1642      /* source and target are same */
+#define MSG_REST_NUM_INVAL_PARA         1643      /* invalid number of para restore */
+#define MSG_REST_INVAL_SPEC             15        /* invalid drive */
+/* 1744 not used */
+#define MSG_REST_NO_FILE_FOUND          1645      /* not files found to restore */
+#define MSG_REST_INVAL_PARA             1002      /* invalid parameter %1 */
+#define MSG_REST_FILE_SHAR              1642      /* sharing conflict */
+/* 1646 - 1647 not used */
+#define MSG_REST_LAST_FILE_NOT          1648      /* last file not restored */
+#define MSG_REST_SOURCE_NO_BACK         1649      /* source does not contain backup files */
+#define MSG_REST_FILE_SEQ_ERROR         1651      /* sequence file out of sequence */
+#define MSG_REST_FILE_CREAT_ERROR       110       /* file creation error */
+/* 1652 - 1654 not used */
+#define MSG_REST_TARG_FULL              112       /* Target is full */
+#define MSG_REST_CANNOT_REST_FILE       1655      /* cannot restore file */
+#define MSG_REST_DISKETTE               1656      /* diskette %1 */
+#define MSG_REST_TARG_DISK              1657      /* insert targ disk in drive %1 */
+/* 1658 - 1663 unused */
+#define MSG_BACK_NUM_INVAL_PARA         1665      /* inval number of parameters */
+#define MSG_BACK_ERROR_LOG_FILE         1664      /* error writing log file */
+#define MSG_BACK_INVAL_PARA             1001      /* inval parameter */
+/* 1666 not used */
+#define MSG_BACK_NO_DRIV_SPEC           1667      /* no drive spec */
+#define MSG_BACK_NO_TARG_SPEC           1668      /* no target specified */
+#define MSG_BACK_INVAL_PATH             3         /* inval path */
+/* 1079 - 1670 not used */
+#define MSG_BACK_SOUR_TARG_SAME         1671      /* source target same */
+#define MSG_BACK_ERR_FORMAT_UTIL        1672      /* error executing format utility */
+#define MSG_BACK_INVAL_DATE             1036      /* inval date */
+/* 1673 - 1675 not used */
+#define MSG_BACK_INVAL_TIME             1044      /* inval time */
+#define MSG_BACK_INVAL_DRIV_SPEC        15        /* inval drive spec */
+#define MSG_BACK_CANNOT_FIND_FORM       1676      /* cannot find format util */
+#define MSG_BACK_ERROR_OPEN_LOGFILE     1677      /* error open logfile */
+#define MSG_BACK_CAN_FORM_UNREM_DR      1678      /* cannot form unremovable drive */
+#define MSG_BACK_LAST_NOT_INSERT        1679      /* last disk not inserted */
+#define MSG_BACK_LOG_TO_FILE            1680      /* log to file %2 */
+#define MSG_BACK_FILE_TARG_DRIVE        1681      /* warning file in target drive %2 */
+#define MSG_BACK_FILE_BACK_ERASE        1682      /* files in target drive %c */
+#define MSG_BACK_FILE_TO_DRIVE          1683      /* backup up files to drive d */
+#define MSG_BACK_DISK_NUM               1684      /* diskette number %2 */
+#define MSG_BACK_WARN_NO_FIL_FND        1685      /* warning no files were found to backup */
+#define MSG_BACK_INSERT_SOURCE          1686      /* insert backup source diskette in dr d */
+#define MSG_BACK_INSERT_BACKUP          1687      /* insert backup source disk %2 in dr */
+#define MSG_BACK_UNABLE_TO_BKUP         1688      /* not able to backup file */
+#define MSG_BACK_LAST_DISK_DRIVE        1689      /* insert last backup diskette in drive */
+#define MSG_BACK_TARG_NOT_USE_BKUP      1690      /* target cannot be used for backup */
+#define MSG_BACK_LAST_FILE_NO_BKUP      1691      /* last file not backed up */
+#define MSG_BACK_DEVICE_D_IS_FULL       1692      /* fixed backup device d is full */
+#define MSG_XCOPY_UNAB_CREATE_DIR       1693      /* unable to create directory */
+#define MSG_XCOPY_PATH_TOO_LONG         1694      /* path too long */
+#define MSG_XCOPY_BLANK_YN              1695      /* blank y/n */
+/* 1696 not used */
+#define MSG_XCOPY_READ_SOURCE_FILE      1697      /* reading source file */
+#define MSG_XCOPY_FILES_COPIED          1698      /* % files copied */
+#define MSG_XCOPY_FILE_NOT_FOUND        1699      /* % file not found */
+#define MSG_XCOPY_DOES_SPEC_FILENA      1700      /* Does % specify a filename */
+#define MSG_XCOPY_CANNOT_COPY_SUB       1701      /* cannot copy using /s to subdirectory */
+/* 1702 not used */
+#define MSG_XCOPY_INVAL_PARA            1001      /* invalid parameter xcopy */
+/* 1703 not used */
+#define MSG_XCOPY_INVAL_NUM_PAR         1704      /* invalid number of parameters xcopy */
+#define MSG_ANSI_EXT_SCR_KEY_ON         1705      /* ansi extended screen and keyboard on */
+#define MSG_ANSI_EXT_SCR_KEY_OFF        1706      /* ansi extended screen and keyboard off */
+#define MSG_ANSI_INVAL_PARA             1001      /* ansi invalid parameter */
+/* 1707 not used */
+/* 1708 - 1736 basemid */
+/* 1737 - 1740 unused */
+/* 1739 - 1740 unused */
+#define MSG_KEYB_TAB_NOT_EXIST          1741      /* translate table does not exist */
+#define MSG_KEYB_READ_TAB               1742      /* error reading translate table file */
+#define MSG_KEYB_INVAL_CODE             1454      /* Invalid keyboard layout code */
+/* 1743 not used */
+#define MSG_KEYB_SYS_ERR                1744      /* System error */
+#define MSG_KEYB_CODE_PAGE              1745      /* Code page not available */
+#define MSG_KEYB_TOO_MANY_PARMS         1454      /* Too many parms */
+/* 1746 not used */
+#define MSG_KEYB_DEF_LOAD               1747      /* Default ready loaded */
+#define MSG_KEYB_DOS_OPEN_ER            1748      /* Dos open error */
+/* 1749 not used */
+#define MSG_KEYB_INVAL_TYPE             1750      /* Invalid keyboard type */
+#define MSG_KEYB_ERR_LOAD_TRANS         1751      /* Invalid loading translate table */
+#define MSG_KEYB_LOADED                 1752      /* translate table loaded */
+/* 1753-1760 unused */
+#define MSG_CHCP_INVALID_PARAMETER      1761      /* invalid parameter */
+#define MSG_CHCP_TASK                   1762      /* unable to set process */
+/* 1763 - 1765 unused */
+#define MSG_CHCP_REPORT                 1766      /* active code page */
+#define MSG_CHCP_SYSTEM                 1767      /* Code page not prepared for system */
+#define MSG_CHCP_NO_CP                  1768      /* Code page not set for system */
+#define MSG_CHCP_DEVICE                 1769      /* Code page not prepared for device */
+/* 1770 - 1772 unused */
+#define MSG_START_INVALID_PARAMETER     1773      /* Invalid parameter to start command */
+/* 1774-1780 unused */
+#define MSG_SPOOLER_FONT_SWITCH         1781      /* error attempting to load font */
+#define MSG_SPOOLER_INVAL_CODE_PG       1782      /* code page id not valid */
+#define MSG_SPOOLER_ERR_OPEN_FONT       1783      /* error attempt to open font file */
+#define MSG_SPOOLER_ERR_READ_FONT       1784      /* error reading font file */
+#define MSG_SPOOLER_ERR_READ_CTRL       1784      /* error reading font file ctrl */
+#define MSG_SPOOLER_READ_DEFIN          1784      /* error reading font file blocks */
+/* 1785 - 1786 not used */
+#define MSG_SPOOLER_INVAL_PRINT         1787      /* invalid printer type in devinfo */
+#define MSG_SPOOLER_INSUF_STOR          1788      /* insuf storage to activate */
+#define MSG_SPOOLER_INCOR_FONT          1789      /* devinfo statement font incorrect */
+#define MSG_SPOOLER_INTER_ERR           1790      /* font switching internal error */
+#define MSG_SPOOLER_TOO_MANY_ROMS       1791      /* too many roms */
+#define MSG_SPOOLER_SOME_FONTS_BAD      1792      /* damaged font files */
+/* 1793-1799 unused */
+#define MSG_CMD_LOCK_VIOLATION          32        /* lock violation */
+/* 1800 - 1803 not used */
+#define MSG_CMD_NOT_DOS_DISK            26        /* media store not dos disk */
+#define MSG_CMD_NO_MEMORY               8         /* No more memory */
+#define MSG_CMD_FILE_NOT_FOUND          1804      /* File not found */
+#define MSG_CMD_ACCESS_DENIED           5         /* access denied */
+/* 1805 - 1808 not used */
+#define MSG_CMD_DRIVE_LOCKED            108       /* drive locked */
+#define MSG_CMD_SHARING_VIOLATION       32        /* sharing violation */
+#define MSG_CMD_SYS_ERR                 1809      /* A system error occurred */
+#define MSG_CMD_DIV_0                   1810      /* process terminated */
+#define MSG_CMD_SOFT_ERR                1811      /* fatal software error */
+#define MSG_CMD_COPROC                  1812      /* process terminated */
+#define MSG_CMD_KILLED                  1813      /* process killed */
+#define MSG_CMD_TOO_MANY_OPEN           1814      /* too many open files */
+/* 1815 - 1824 unused */
+#define MSG_PROG_CANT_FIND_FILE         1825      /* cant find file */
+#define MSG_PROG_NO_MEM                 1826      /* cannot process command */
+#define MSG_PROG_NON_RECOV              1827      /* cannot process request */
+#define MSG_PROG_CNT_START              1828      /* cannot start selected program */
+/* 1829  not used */
+#define MSG_PROG_NO_MOU                 1830      /* cannot set mou key assign */
+#define MSG_PROG_UNEXCEPT_FORMAT        1831      /* unacceptable executable format file */
+/* 1832 - 1838 unused */
+#define MSG_FDISK_WHOLEDISK_2           1839      /* maximum size */
+#define MSG_FDISK_CREATE_DOS_MENU       1840      /* create dos menu */
+#define MSG_FDISK_CREATE_DOS_EXT        1841      /* create dos extended partition */
+#define MSG_FDISK_CREATE_PRIME_HD       1842      /* create primary menu */
+#define MSG_FDISK_CREATE_EXT_HD         1843      /* create extended menu */
+#define MSG_FDISK_CREATE_LOG_HD         1844      /* create logical drive */
+#define MSG_FDISK_EXT_CREATED           1845      /* extended part created */
+#define MSG_FDISK_VOL_CREATED           1846      /* volume created */
+/* 1847 not used */
+#define MSG_FDISK_DEL_MENU              1848      /* delete menu */
+#define MSG_FDISK_DEL_LOG_DRV           1849      /* delete logical drive */
+#define MSG_FDISK_DEL_PRIM_DOS          1850      /* delete primary dos partition */
+#define MSG_FDISK_DEL_EXT_PART          1851      /* delete extended dos partition */
+#define MSG_FDISK_DEL_LOG_HD            1852      /* delete logical drive */
+#define MSG_FDISK_ALL_LOG_DEL           1853      /* logical drive deleted */
+#define MSG_FDISK_EXT_DEL               1854      /* extended partition deleted */
+/* 1855 not used */
+#define MSG_FDISK_EXT_PART_DEL          1856      /* extended dos partition deleted */
+#define MSG_FDISK_DRV_DEL               1857      /* drive deleted */
+/* 1858 not used */
+#define MSG_FDISK_CUR_PART_NOT_BOOT     1859      /* the partitions marked is boot */
+#define MSG_FDISK_WARN_LOG_LOST         1860      /* data in log drive will be lost */
+#define MSG_FDISK_WARN_EXT_LOST         1861      /* data in extended part will be lst */
+#define MSG_FDISK_SURE_QUERY            1862      /* are you sure? */
+#define MSG_FDISK_LOG_SIZE_INP          1863      /* logical drive size */
+#define MSG_FDISK_DISP_LOG_INFO_INP     1864      /* extended partition cont log dr */
+#define MSG_FDISK_ESC_TO_DOS            1865      /* press esc to return to dos */
+#define MSG_FDISK_DEFAULT_INP           1866      /* 1 */
+#define MSG_FDISK_MAX_LOG_SPACE         1867      /* total part avail is cylinders */
+#define MSG_FDISK_TOT_PART_SIZE         1868      /* Total partition size is cylinder */
+/* 1869 not used */
+#define MSG_FDISK_CUR_FDISK_LOG         1870      /* current fixed disk drive */
+/* 1871 not used */
+#define MSG_FDISK_DRV_LETTERS_CHNGD     1872      /* drive letter have changed or del */
+#define MSG_FDISK_BOOT_AL_ACT           1873      /* bootable part on drive 1 is act */
+#define MSG_FDISK_EXT_FULL              1874      /* avail space is assign to log dr */
+#define MSG_FDISK_NO_BOOT_EXIST         1875      /* only non-boot part on dr 1 */
+#define MSG_FDISK_ONLY_CURDRV_PART_ACT  1876      /* only part on drive 1 can be act */
+#define MSG_FDISK_MAX_LOGDRV_INS        1877      /* maximum number of log dos dr ins */
+/* 1878 not used */
+#define MSG_FDISK_CANT_DEL_PRIM         1879      /* cannot delete primary dos part */
+#define MSG_FDISK_MAX_AVAIL_SPACE       1880      /* max avail space for partit cyl */
+#define MSG_FDISK_LOG_INFO_HD           1881      /* drive start end size */
+#define MSG_FDISK_LOG_INFO              1882      /* 1 2 3 4 */
+#define MSG_FDISK_PART_INFO             1883      /* 1 2 3 4 5 6 7 8 */
+#define MSG_FDISK_ERR_EXT_EXIST         1884      /* extended part already exists */
+#define MSG_FDISK_ERR_NO_EXT            1885      /* no extended part to delete */
+/* 1886 not used */
+#define MSG_FDISK_PART_TOO_SMALL        1887      /* file partition too small */
+#define MSG_FDISK_ERR_PART_NOT_BOOT     1859      /* partition selected is not bootable */
+#define MSG_FDISK_ERR_NO_LOG_DEF        1888      /* no logical drives defined */
+#define MSG_FDISK_ERR_LOG_INP_2_BIG     1889      /* requested log drive size exceeds */
+#define MSG_FDISK_ERR_PART_INP_2_BIG    1890      /* requested part size exceeds max */
+#define MSG_FDISK_ERR_NO_PART_2_DEL     1891      /* no partitions to delete */
+#define MSG_FDISK_ERR_NO_PRIM_PART      1892      /* cannot create extend dos prim dk */
+#define MSG_FDISK_ERR_LOG_STILL_EXIST   1893      /* cannot delete extend part log dr */
+#define MSG_FDISK_ERR_0_PART_SPEC       1894      /* cannot create a zero cylinder pr */
+#define MSG_FDISK_ERR_DRV_DEL           1895      /* drive already deleted */
+#define MSG_FDISK_INTERNAL_ERROR        1896      /* internal error */
+#define MSG_FDISK_ERR_COMMAND_LINE      1897      /* unsupported switch ignored */
+#define MSG_START_NONE                  1898      /* screen group not started */
+#define MSG_MODE_COM_PORT               1901      /* query status not available */
+#define MSG_MODE_P_IGNORE               1902      /* P option ignored */
+/* 1903-1914 unused */
+/* 1915-1956 in basemid */
+/* 1957-1959 unused */
diff --git a/v4.0/src/H/UTILMID3.H b/v4.0/src/H/UTILMID3.H
new file mode 100644
index 0000000..1b70812
--- /dev/null
+++ b/v4.0/src/H/UTILMID3.H
@@ -0,0 +1,100 @@
+/*      SCCSID = @(#)utilmid3.h 5.13 87/05/05 */
+
+#define MSG_SPOOL_WTRUNC_ERROR          1425      /* cannot release filling file - print */
+#define MSG_SPOOL_OPEN_ERROR            1426      /* cannot delete filling file - print */
+#define MSG_SPOOL_SIG_ERROR             1427      /* cannot delete printing file - print */
+#define MSG_SPOOL_MACH_ERROR            1428      /* cannot hold filling file - print */
+#define MSG_SPOOL_RUN_PRINT_DATA        1429      /* spool running with print data redir */
+#define MSG_SPOOL_RUN_DEVICE            1430      /* spool print run on device */
+#define MSG_INSTALL_SIMUL_PIPS          1960      /* pips being executed simultaneously */
+#define MSG_INSTALL_UNKNOWN_CMD         1961      /* not recognize cmd in pip */
+#define MSG_INSTALL_PANEL_ERROR         1962      /* cannot display panel */
+#define MSG_INSTALL_FILE_CREATE_ERR     1963      /* cannot create the file */
+#define MSG_INSTALL_LABEL_NOT_FOUND     1964      /* cannot find the label */
+#define MSG_INSTALL_FILE_NOT_FOUND      1965      /* cannot find file */
+#define MSG_INSTALL_FILE_NAME_ERR       1966      /* unacceptable file name */
+#define MSG_INSTALL_FILE_OPEN_ERR       1967      /* file open error */
+#define MSG_INSTALL_MEM_ALLOC_ERR       1968      /* memory allocation error */
+/* 1969 not used */
+#define MSG_INSTALL_UNBAL_COMMENTS      1970      /* cannot read part of pip */
+#define MSG_INSTALL_SYNTAX_ERR          1971      /* syntax error */
+#define MSG_INSTALL_UNSPEC_CHOICE       1972      /* missing choice parameter */
+#define MSG_INSTALL_SHELL_ADD_ERR       1973      /* title on program selector */
+#define MSG_INSTALL_DUPLICATE_LABEL     1974      /* duplicate label name */
+#define MSG_INSTALL_UNSUCCESSFUL        1975      /* not able to install */
+#define MSG_INSTALL_HY_HDR              1976      /* history file header */
+#define MSG_INSTALL_HY_TITLE            1977      /* history file title */
+#define MSG_INSTALL_HY_CRDATE           1978      /* history file date */
+#define MSG_INSTALL_HY_UPDATE           1979      /* history file update */
+#define MSG_TRC_NOT_ACTIVE              1397      /* trace not active */
+/* 1980 not used */
+#define MSG_TRC_ABEND                   1981      /* not properly formatted */
+/* 1982 - 1984 not used */
+#define MSG_INSTALL_BAD_PIP_EXT         1985      /* bad pip extension */
+/* 1986 - 1990 unused */
+#define MSG_EDLIN_INVALID_DOS_VER       1991      /* Invalid DOS version$ */
+#define MSG_EDLIN_Y_IS_FOR_YES          1992      /* Answer for abort and OK questions */
+#define MSG_EDLIN_FILENAME_NOT_SPEC     1993      /* Filename must be specified */
+#define MSG_EDLIN_INVALID_PARAMETER     1994      /* Invalid parameter */
+#define MSG_EDLIN_FILE_READ_ONLY        1061      /* File is read only */
+/* 1995 not used */
+#define MSG_EDLIN_TOO_MANY_FILES        1996      /* Too many files are open */
+#define MSG_EDLIN_READ_ERROR_IN         1997      /* Read error in %S */
+#define MSG_EDLIN_CANNOT_EDIT           1998      /* Cannot edit .BAK file -- rename file */
+#define MSG_EDLIN_DISK_FULL             1999      /* Disk full edits lost */
+#define MSG_EDLIN_INSUFFICIENT_MEM      8         /* Insufficient memory */
+/* 2000not used */
+#define MSG_EDLIN_ENTRY_ERROR           2001      /* Syntax entry error */
+#define MSG_EDLIN_NEW_FILE              2002      /* New file */
+#define MSG_EDLIN_NOT_FOUND             2003      /* Cannot find string specified */
+#define MSG_EDLIN_OKAY                  2004      /* Okay OK? */
+#define MSG_EDLIN_LINE_TOO_LONG         2005      /* The line is too long */
+#define MSG_EDLIN_END_INPUT_FILE        2006      /* End of the input file */
+#define MSG_EDLIN_ABORT_EDIT            2007      /* Abort edit Y/N ? */
+#define MSG_EDLIN_SPECIFY_LINE_NO       2008      /* Must specify destination line number */
+#define MSG_EDLIN_NOT_ENOUGH_ROOM       2009      /* Not enough room to merge entire file */
+#define MSG_GRAFT_ENG_VER               2010      /* Eng version */
+#define MSG_GRAFT_CANFR_VER             2011      /* Canfrench version */
+#define MSG_GRAFT_PORT_VER              2012      /* Portugese version */
+#define MSG_GRAFT_NORD_VER              2013      /* Nordic version */
+#define MSG_GRAFT_ENG_LOAD              2014      /* Eng version loaded */
+#define MSG_GRAFT_CANFR_LOAD            2015      /* Canadian French version loaded */
+#define MSG_GRAFT_PORT_LOAD             2016      /* Portugese version loaded */
+#define MSG_GRAFT_NORD_LOAD             2017      /* Nordic version loaded */
+#define MSG_GRAFT_NO_LOAD               2018      /* No Graftable loaded */
+#define MSG_GRAFT_ALREAD_LOAD           2019      /* Graftable already loaded */
+#define MSG_GRAFT_INCOR_PARM            1001      /* Graftable incorrect parm */
+/* 2020 not used */
+#define MSG_GRAFT_PARM_SUP              2021      /* Graftable parameter supported */
+/* 2022 - 2024 unused */
+/* 2025 - 2031 basemid */
+/* 2032 - 2034 unused */
+#define MSG_FDISK_ESC_TO_CREATE         2035      /* press escape to create logical drive */
+/* 2036 - 2039 unused */
+#define MSG_DCOPY_WRITE_ERROR           2040      /* Unrecoverable error writing to */
+/* 2041 - 2045 */
+#define MSG_APPEND_NO_DIR               2046      /* no append dir */
+#define MSG_APPEND_ASSIGN_CONFLICT      2047      /* assign conflict */
+#define MSG_APPEND_TOPVIEW_CONFLICT     2048      /* topview conflict */
+#define MSG_APPEND_ALREADY_INSTALLED    2049      /* append is already installed */
+#define MSG_APPEND_INVAL_PATH_PARM      2050      /* invalid path or parameter */
+#define MSG_APPEND_INVAL_PATH           2050      /* invalid path */
+#define MSG_APPEND_INCOR_APPEND_VER     2052      /* incorrect append version */
+/* 2053 - 2055 */
+#define MSG_UNEXPEC_ERROR_ENC           2056      /* unexpected error encountered */
+/* 2057 - 2070 basemid */
+#define MSG_FMT_SKIPPING                2071      /* skipping ADOS files */
+#define MSG_FMT_SYS_SKIP                2072      /* files skipped during xfer */
+/* 2073 - 2075 unused */
+#define MSG_PROG_DOS                    2076      /* to refer to the PCDOS mode box */
+#define MSG_PROG_MORE                   2077      /* more data to be scrolled */
+/* 2078 - 2080 unused */
+#define MSG_INSTALL_SELECT              2081      /* syntax error SELECT/ESELECT block */
+/* 2082 - 2085 unused */
+#define MSG_LOST_LIBRARY                2086      /* the library is lost */
+#define MSG_SETCOM_OPEN_ERROR           2087      /* unable to open a port */
+#define MSG_SETCOM_DISABLE              2088      /* port has been disabled */
+#define MSG_SETCOM_ENABLE               2089      /* port has been enabled */
+#define MSG_BIND_RESERVED               2090      /* unable to load the program */
+/* 2091 - 2999 unused */
+/* 3000 - 3100 reserved for IBM Far East */
diff --git a/v4.0/src/H/UTLERROR.H b/v4.0/src/H/UTLERROR.H
new file mode 100644
index 0000000..89d2a30
--- /dev/null
+++ b/v4.0/src/H/UTLERROR.H
@@ -0,0 +1,92 @@
+/*      SCCSID = @(#)utlerror.h 8.7 87/03/09 */
+/* */
+/* error codes for utilities */
+/* */
+
+#define ERROR_INVALID_DOSVER            1000      /* invalid dos version */
+#define ERROR_LANGUAGE_NOT_SUPPORTED    1001      /* language not supported */
+#define ERROR_INVALID_FILENAME          1002      /* invalid file name */
+#define ERROR_MSGFILE_BAD_FORMAT        1010      /* bad message file format */
+#define ERROR_MSGFILE_BAD_MID           1011      /* message file has bad mid */
+#define ERROR_MSGFILE_OUTERROR          1012      /* error writing output file */
+#define ERROR_MSGFILE_INPERROR          1013      /* error reading input file */
+#define ERROR_MSGFILE_SYNTAX            1014      /* syntax error */
+#define ERROR_MSGFILE_MSG_TOO_BIG       1015      /* message exceeds system limit */
+#define ERROR_INSTALL_FAILED            1016      /* install failed */
+#define ERROR_INVALID_VOL               1017      /* no volume with /s option */
+#define ERROR_INVALID_INPUT_PARM        1018      /* invalid input parameter */
+#define ERROR_FILE_SPEC_REQUIRED        1019      /* file specification required */
+#define ERROR_SORT_FILE_TOO_BIG         1020      /* file size to big to sort */
+#define ERROR_SORT_INVALID_COL          1021      /* invalid column number for sort */
+#define ERROR_CHK_BAD_FAT               1022      /* fat bad on specified drive */
+#define ERROR_CHK_BAD_ROOT              1023      /* root bad on specified drive */
+#define ERROR_INVALID_PARM_NUMBER       1024      /* invalid parameter number */
+#define ERROR_PARM_SYNTAX               1025      /* invalid parameter syntax */
+#define ERROR_UTIL_TERMINATED           1026      /* program terminated by user */
+#define ERROR_REST_NO_BACKUP            1027      /* source does not contain backup file */
+#define ERROR_REST_SEQUENCE_ERROR       1028      /* file sequence error */
+#define ERROR_REST_FILE_CREATE          1029      /* file creation error */
+#define ERROR_FDISK_ERR_WRITE           1030      /* error writing fixed disk */
+#define ERROR_FDISK_ERR_READ            1031      /* error reading fixed disk */
+#define ERROR_FDISK_ERR_NOFDISKS        1032      /* no fixed disk present */
+#define ERROR_PATCH_NO_CTL_FILE         1033      /* cannot open patch control file */
+#define ERROR_PATCH_NO_EXE_FILE         1034      /* cannot open file to patch */
+#define ERROR_PATCH_CANT_ALLOC          1035      /* insufficient memory to alloc patch */
+#define ERROR_PATCH_INV_CMD_COMBO       1036      /* bad command sequence */
+#define ERROR_PATCH_INV_OFFSET          1037      /* invalid offset */
+#define ERROR_PATCH_INV_BYTES           1038      /* invalid byte string */
+#define ERROR_PATCH_TOO_NEAR_EOF        1039      /* too close to end of file */
+#define ERROR_PATCH_VERIFY_FAILED       1040      /* verification failed */
+#define ERROR_PATCH_INC_VERIFY          1041      /* offset verification failed */
+#define ERROR_SPOOL_INVAL_DEVICE        1042      /* invalid device */
+#define ERROR_SPOOL_INVAL_IN_DEV_PAR    1043      /* invalid input device parm */
+#define ERROR_SPOOL_INVAL_OUT_DEV_PAR   1044      /* invalid output device parm */
+#define ERROR_SPOOL_INVAL_SUB           1045      /* invalid subdirectory */
+#define ERROR_SPOOL_INTERN_ERROR        1046      /* internal error */
+#define ERROR_SPOOL_DISK_FULL           1047      /* spool disk full */
+#define ERROR_SPOOL_CANNOT_PT_NXT_FI    1048      /* cannot print next file */
+#define ERROR_SPOOL_CANNOT_PTR_NOW_FI   1049      /* cannot print now */
+#define ERROR_XCOPY_CANNOT_COPY_SUB     1050      /* cannot copy subdirectory */
+#define ERROR_XCOPY_ITSELF              1051      /* cannot copy to itself */
+#define ERROR_DISKC_DRIVE_SPEC          1052      /* drive mismatch in diskcomp/copy */
+#define ERROR_FORMAT_FAIL               1053      /* format failed */
+#define ERROR_FORMAT_INV_MEDIA          1054      /* format had invalid media */
+#define ERROR_RAS_STCP                  1055      /* system trace command processor error */
+#define ERROR_RAS_CREATEDD              1056      /* error in create dump diskette */
+#define ERROR_XCOPY_UNAB_CREATE_DIR     1057      /* unable to create directory */
+#define ERROR_XCOPY_PATH_TOO_LONG       1058      /* path to long */
+#define ERROR_XCOPY_CANNOT_TO_RES_DEV   1059      /* can't copy to a reserved name */
+#define ERROR_XCOPY_CANNOT_COPY_RES     1060      /* can't copy from a reserved name */
+#define ERROR_XCOPY_INVAL_DATE          1061      /* invalid date */
+#define ERROR_XCOPY_INTERNAL            1062      /* xcopy internal error */
+#define ERROR_PRINT_INVALID_PARAMETER   1063      /* invalid parameter */
+#define ERROR_PRINT_FILE_NOT_FOUND      1064      /* file not found */
+#define ERROR_PRINT_INVALID_DRIVE       1065      /* invalid drive */
+#define ERROR_PRINT_INVALID_DOSVER      1066      /* invalid DOS version */
+#define ERROR_PRINT_BAD_ENVIRONMENT     1067      /* bad environment */
+#define ERROR_PRINT_MSGFILE_BAD_MID     1068      /* bad message ID */
+#define ERROR_PRINT_SYS_INTERNAL        1069      /* PRINT internal error */
+#define ERROR_SYS_SYS_INTERNAL          1070      /* SYS internal error */
+#define ERROR_SYS_MSGFILE_BAD_MID       1071      /* bad message ID */
+#define ERROR_SYS_INVALID_DOSVER        1072      /* invalid DOS version */
+#define ERROR_SYS_INVALID_DRIVE         1073      /* invalid drive */
+#define ERROR_SYS_INVALID_MEDIA         1074      /* invalid media */
+#define ERROR_SYS_INVALID_PARM          1076      /* invalid parameter */
+#define ERROR_FORMAT_INTERRUPT          1077      /* format interrupted */
+#define ERROR_FORMAT_NO_SYSXFER         1078      /* error in system xfer */
+#define ERROR_FORMAT_USER_TERM          1079      /* terminated by N resp */
+#define ERROR_BACK_NO_FILES             1080      /* no files found for backup */
+#define ERROR_BACK_SHARE_ERROR          1081      /* sharing error during backup */
+#define ERROR_BACK_FDISKFULL            1082      /* fixed disk is full during backup */
+#define ERROR_BACK_INVTARGET            1083      /* invalid backup target disk */
+#define ERROR_BACK_INVTIME              1084      /* invalid time parameter */
+#define ERROR_BACK_NOSOURCE             1085      /* no source backup files */
+#define ERROR_BACK_NOTARGET             1086      /* no target backup files */
+#define ERROR_BACK_SRC_TGT_SAME         1087      /* backup source and target same */
+#define ERROR_MSGFILE_DBCS              1088      /* error in message file dbcs */
+#define ERROR_HELP_MID_LARGE            1089      /* error in message file dbcs */
+#define ERROR_HELP_SYNTAX               1090      /* error in message file dbcs */
+#define ERROR_HELP_BAD_MID              1091      /* error in message file dbcs */
+#define ERROR_HELP_NO_HELP              1092      /* error in message file dbcs */
+#define ERROR_SORT_RCD_SIZE_EXCEED      1093      /* sort record size exceeded */
+#define ERROR_CM_EOF_REDIRECT           1094      /* eof found on redr input */
diff --git a/v4.0/src/H/VERSION.H b/v4.0/src/H/VERSION.H
new file mode 100644
index 0000000..5c681d9
--- /dev/null
+++ b/v4.0/src/H/VERSION.H
@@ -0,0 +1,6 @@
+/*  Use the switch below to produce the standard Microsoft version 
+    or the IBM version of the operating system */
+
+
+#define IBMCOPYRIGHT 0
+
diff --git a/v4.0/src/H/VERSIONC.H b/v4.0/src/H/VERSIONC.H
new file mode 100644
index 0000000..1802f1f
--- /dev/null
+++ b/v4.0/src/H/VERSIONC.H
@@ -0,0 +1,15 @@
+
+    #include <stdlib.h>     /* Declaration & init of DOS _osmajor & _osminor */
+
+    #define  expected_version_major     4       /* DOS Major Version 4 */
+    #define  expected_version_minor     00      /* DOS Minor Version 00 */
+
+       /********************************************/
+       /*Each C program should:                    */
+       /*                                          */
+       /* if ((expected_version_major != _osmajor) */
+       /*   | (expected_version_minor != _osminor))*/
+       /*  exit(incorrect_dos_version);            */
+       /*                                          */
+       /********************************************/
+