MZ is back!HEADmain

1 files changed, 270 insertions, 0 deletions

diff --git a/v4.0/src/BIOS/MSLPT.ASM b/v4.0/src/BIOS/MSLPT.ASM
new file mode 100644
index 0000000..ad858a0
--- /dev/null
+++ b/v4.0/src/BIOS/MSLPT.ASM
@@ -0,0 +1,270 @@
+        PAGE ,132 ;
+        TITLE MSLPT - BIOS
+        %OUT    ...MSLPT.ASM
+
+;==============================================================================
+;REVISION HISTORY:
+;AN000 - New for DOS Version 4.00 - J.K.
+;AC000 - Changed for DOS Version 4.00 - J.K.
+;AN00x - PTM number for DOS Version 4.00 - J.K.
+;==============================================================================
+;AN001 - P156 KBMLPT device driver's retry logic.                  8/18/87 J.K.
+;==============================================================================
+        itest=0
+        INCLUDE MSGROUP.INC     ;DEFINE CODE SEGMENT
+        INCLUDE MSEQU.INC
+        INCLUDE MSMACRO.INC
+        INCLUDE DEVSYM.INC
+        INCLUDE IOCTL.INC
+
+        EXTRN BUS$EXIT:NEAR             ;MSBIO1
+        EXTRN ERR$CNT:NEAR              ;MSBIO1
+        EXTRN CMDERR:NEAR               ;MSBIO1
+        EXTRN GETDX:NEAR                ;MSBIO1
+        EXTRN EXIT:NEAR                 ;MSBIO1
+        EXTRN ERR$EXIT:NEAR             ;MSBIO1
+;DATA
+        EXTRN PTRSAV:DWORD              ;MSBIO1
+        EXTRN TIMDEV:WORD               ;MSCLOCK
+        EXTRN LPT2DEV:WORD              ;MSBIO2
+        EXTRN WAIT_COUNT:WORD           ;MSDATA
+        EXTRN PRINTDEV:BYTE             ;MSDATA
+; IBM ROM STATUS BITS (I DON'T TRUST THEM, NEITHER SHOULD YOU)
+
+NOTBUSYSTATUS   =   10000000B           ; NOT BUSY
+ACKSTATUS       =   01000000B           ; ACKNOWLEDGE (FOR WHAT?)
+NOPAPERSTATUS   =   00100000B           ; NO MORE PAPER
+SELECTEDSTATUS  =   00010000B           ; THE PRINTER SAID IT WAS SELECTED
+IOERRSTATUS     =   00001000B           ; SOME KINDA ERROR
+RESERVED        =   00000110B           ; NOPS
+TIMEOUTSTATUS   =   00000001B           ; TIME OUT.
+
+
+; WARNING!!!  THE IBM ROM DOES NOT RETURN JUST ONE BIT.  IT RETURNS A
+; WHOLE SLEW OF BITS, ONLY ONE OF WHICH IS CORRECT.
+
+;----------------------------------------------------------
+;J.K. AN001; PRN$WRIT will retry only if error code is TIMEOUT.
+
+;       WRITE TO PRINTER DEVICE
+
+;   CX HAS COUNT OF BYTES
+;   ES:DI POINT TO DESTINATION
+;   AUXNUM HAS PRINTER NUMBER
+
+        PUBLIC PRN$WRIT
+PRN$WRIT PROC   NEAR
+        ASSUME  DS:CODE                 ; SET BY PRINTER DEVICE DRIVER ENTRY
+
+        jcxz    Prn$Done                ;No char to output
+Prn$Loop:
+        mov     bx, 2                   ;Initialize retry count
+Prn$Out:
+;SB34LPT000****************************************************************
+;SB  Print the character at ES:[DI]
+;SB     Call the function PrnOP to do this
+;SB     The character to be printed goes in AL and the function code
+;SB     for 'Output character' goes in AH
+;SB     Check for error in printing.  
+;SB     If there is no error go to print the next character.
+;SB     If there is an error indicated see if it is due to TIMEOUT.  If the
+;SB     error is not TIMEOUT then we can do nothing about it.  Just go to
+;SB     print the next character.  If it is due to timeout we can execute
+;SB     the code to retry the print which follows this piece of code
+;SB             LOCS: 6
+
+        mov     al,es:[di]      ; assume AX disposible since enter
+        xor     ah,ah           ; via int 21h
+        call    PrnOp           ; print to printer
+        jz      Prn$Con         ; no error - continue
+        test    ah,TIMEOUTSTATUS
+        jz      Prn$Con         ; NOT time out - continue
+
+;SB34LPT000****************************************************************
+        dec     bx                      ;Retry until count is exhausted.
+        jnz     Prn$Out                 ;Retry it.
+        jmp short Pmessg                ;Return with error.
+   ;
+   ; next character
+   ;
+Prn$Con:
+        inc     di                      ;point to next char and continue
+        loop    Prn$Loop
+Prn$Done:
+        jmp     Exit
+Pmessg:
+        jmp     Err$Cnt
+PRN$WRIT        endp
+
+;        JCXZ    EXVEC3                  ; NO CHARS TO OUTPUT..
+;PRN$LOOP:
+;        MOV     BX,2                    ; INITIALIZE RETRY FLAG
+;PRN$OUT:
+;        MOV     AL,ES:[DI]              ; GET CHAR INTO AL
+;        INC     DI                      ; POINT TO NEXT CHAR
+;        XOR     AH,AH                   ; AH=0 => OUTPUT CHAR IN DL
+;        CALL    PRNOP                   ; TO INDICATE PRINT CHAR IN AL
+;        JNZ     PRRETRY
+;        LOOP    PRN$LOOP
+;EXVEC3:
+;        JMP     EXIT
+;PRRETRY:
+;        DEC     DI                      ; UNDO THE INC ABOVE...
+;        DEC     BX
+;        JNZ     PRN$OUT
+;PMESSG:
+;        JMP     ERR$CNT                 ;RETURN WITH THE ERROR
+;PRN$WRIT ENDP
+
+;--------------------------------------------------------
+
+;       PRINTER STATUS ROUTINE
+
+        PUBLIC PRN$STAT
+PRN$STAT PROC   NEAR
+        ASSUME  DS:CODE                 ; SET BY PRINTER DEVICE DRIVER ENTRY
+
+        CALL    PRNSTAT                 ;DEVICE IN DX
+        JNZ     PMESSG                  ; OTHER ERRORS WERE FOUND
+;J.K. The next three lines are commented out, since it is a dead code.
+;        MOV     AL,9                    ; AGAIN, ASSUME OUT OF PAPER...
+;        TEST    AH,NOPAPERSTATUS
+;        JNZ     PMESSG
+        TEST    AH,NOTBUSYSTATUS
+        jnz     Prn$Done                ;No error. Exit
+        JMP     BUS$EXIT
+PRN$STAT ENDP
+
+; TAKE THE APPROPRIATE PRINTER AND DO THE OPERATION.  TRIAGE THE STATUS
+; RETURNED IN AH INTO SOME MEANINGFUL ERROR.
+
+PRNSTAT PROC    NEAR
+;SB33037**********************************************************************
+        mov     AH, 2                   ; set command for get status  ;SB ;3.30*
+PRNOP:                                                                ;SB ;3.30*
+        call    GETDX                   ; determine which printer     ;SB ;3.30*
+        int     17h                     ; call ROM-BIOS printer routine ;SB;3.30*
+
+;SB33037**********************************************************************
+
+; EXAMINE THE STATUS BITS TO SEE IF AN ERROR OCCURRED.  UNFORTUNATELY, SEVERAL
+; OF THE BITS ARE SET SO WE HAVE TO PICK AND CHOOSE.  WE MUST BE EXTREMELY
+; CAREFUL ABOUT BREAKING BASIC.
+
+        TEST    AH,IOERRSTATUS          ; I/O ERROR?
+        JZ      CHECKNOTREADY           ; NO, TRY NOT READY
+
+; AT THIS POINT, WE KNOW WE HAVE AN ERROR.  THE CONVERSE IS NOT TRUE.
+
+        MOV     AL,9                    ; FIRST, ASSUME OUT OF PAPER
+        TEST    AH,NOPAPERSTATUS        ; OUT OF PAPER SET?
+        JNZ     RET1                    ; YES, ERROR IS SET
+        INC     AL                      ; INDICATE I/O ERROR
+RET1:
+
+; WE HAVE TRIAGED NOW FOR OUT OF PAPER AND IO ERR (IGNORING TIME-OUT)
+
+        RET                             ; RETURN WITH ERROR
+
+; THE BITS SAID NO ERROR.  UNFORTUNATELY, THERE MAY BE OTHER THINGS AT WORK
+; HERE.
+
+CHECKNOTREADY:
+        MOV     AL,2                    ; ASSUME NOT-READY
+        TEST    AH,TIMEOUTSTATUS        ; IS TIME-OUT SET?
+                                        ; IF NZ THEN ERROR, ELSE OK???
+PRNOP2:
+        RET
+PRNSTAT ENDP
+
+; OUTPUT UNTIL BUSY.  THIS ENTRY POINT IS USED EXCLUSIVELY BY THE PRINT
+; SPOOLERS.  UNDER NO CURCUMSTANCES SHOULD THE DEVICE DRIVER BLOCK WAITING FOR
+; THE DEVICE TO BECOME READY.
+
+;   INPUTS:     CX HAS COUNT OF BYTES TO OUTPUT.
+;               ES:DI POINTS TO SOURCE BUFFER
+;   OUTPUTS:    SET THE NUMBER OF BYTES TRANSFERRED APPROPRIATELY
+        PUBLIC  PRN$TILBUSY
+PRN$TILBUSY PROC NEAR
+        ASSUME  DS:CODE                 ; SET BY PRINTER DEVICE DRIVER ENTRY
+
+        PUSH    DS
+        PUSH    ES
+        POP     DS                      ; NOW ES AND DS BOTH POINT TO SOURCE BUFFER
+        ASSUME  DS:NOTHING
+
+        MOV     SI,DI                   ; EVERYTHING IS SET FOR LODSB
+PRN$TILBLOOP:
+        PUSH    CX
+        PUSH    BX
+        XOR     BX,BX
+        MOV     BL,CS:[PRINTDEV]
+        SHL     BX,1
+        MOV     CX,CS:WAIT_COUNT[BX]    ; WAIT COUNT TIMES TO COME READY
+        POP     BX
+PRN$GETSTAT:
+        CALL    PRNSTAT                 ; GET STATUS
+        JNZ     PRN$BPERR               ; ERROR
+        TEST    AH,10000000B            ; READY YET?
+        LOOPZ   PRN$GETSTAT             ; NO, GO FOR MORE
+        POP     CX                      ; GET ORIGINAL COUNT
+        JZ      PRN$BERR                ; STILL NOT READY => DONE
+        LODSB
+        XOR     AH,AH
+        CALL    PRNOP
+        JNZ     PRN$BERR                ; ERROR
+        LOOP    PRN$TILBLOOP            ; GO FOR MORE
+PRN$B:
+        POP     DS
+        LDS     BX,CS:[PTRSAV]
+        ASSUME  DS:NOTHING
+        SUB     WORD PTR [BX].COUNT,CX  ;# OF SUCCESSFUL I/O'S
+        JMP     EXIT
+PRN$TILBUSY ENDP
+
+PRN$BPERR PROC  NEAR
+        ASSUME  DS:CODE
+        POP     CX
+PRN$BERR:
+        POP     DS
+        LDS     BX,CS:[PTRSAV]
+        ASSUME  DS:NOTHING
+
+        SUB     WORD PTR [BX].COUNT,CX  ;# OF SUCCESSFUL I/O'S
+        JMP     ERR$EXIT
+PRN$BPERR ENDP
+;
+; MANIPULATES THE VALUE IN WAIT_COUNT DEPENDING ON THE VALUE PASSED IN THE
+; GENERIC IOCTL PACKET.
+; IT EITHER SETS OR RETURNS THE CURRENT VALUE FOR THE RETRY COUNT FOR THE
+; DEVICE.
+;
+        PUBLIC PRN$GENIOCTL
+PRN$GENIOCTL PROC NEAR
+        ASSUME  DS:CODE                 ; SET BY PRINTER DEVICE DRIVER ENTRY
+
+        LES     DI,[PTRSAV]
+        CMP     ES:[DI].MAJORFUNCTION,IOC_PC
+        JE      PRNFUNC_OK
+PRNFUNCERR:
+        JMP     CMDERR
+
+PRNFUNC_OK:
+        MOV     AL,ES:[DI].MINORFUNCTION
+        LES     DI,ES:[DI].GENERICIOCTL_PACKET
+        XOR     BX,BX
+        MOV     BL,[PRINTDEV]           ; GET INDEX INTO RETRY COUNTS
+        SHL     BX,1
+        MOV     CX,WAIT_COUNT[BX]       ; PULL OUT RETRY COUNT FOR DEVICE
+        CMP     AL,GET_RETRY_COUNT
+        JZ      PRNGETCOUNT
+        CMP     AL,SET_RETRY_COUNT
+        JNZ     PRNFUNCERR
+        MOV     CX,ES:[DI].RC_COUNT
+PRNGETCOUNT:
+        MOV     WAIT_COUNT[BX],CX       ; PLACE "NEW" RETRY COUNT
+        MOV     ES:[DI].RC_COUNT,CX     ; RETURN CURRENT RETRY COUNT
+        JMP     EXIT
+PRN$GENIOCTL ENDP
+CODE    ENDS
+        END