8 files changed, 270 insertions, 4 deletions

diff --git a/src/input_common/helpers/joycon_driver.cpp b/src/input_common/helpers/joycon_driver.cpp
index 5d0aeabf5..c0a03fe2e 100644
--- a/src/input_common/helpers/joycon_driver.cpp
+++ b/src/input_common/helpers/joycon_driver.cpp
@@ -52,12 +52,18 @@ DriverResult JoyconDriver::InitializeDevice() {
     error_counter = 0;
     hidapi_handle->packet_counter = 0;
 
+    // Reset external device status
+    starlink_connected = false;
+    ring_connected = false;
+    amiibo_detected = false;
+
     // Set HW default configuration
     vibration_enabled = true;
     motion_enabled = true;
     hidbus_enabled = false;
     nfc_enabled = false;
     passive_enabled = false;
+    irs_enabled = false;
     gyro_sensitivity = Joycon::GyroSensitivity::DPS2000;
     gyro_performance = Joycon::GyroPerformance::HZ833;
     accelerometer_sensitivity = Joycon::AccelerometerSensitivity::G8;
@@ -66,6 +72,7 @@ DriverResult JoyconDriver::InitializeDevice() {
     // Initialize HW Protocols
     calibration_protocol = std::make_unique<CalibrationProtocol>(hidapi_handle);
     generic_protocol = std::make_unique<GenericProtocol>(hidapi_handle);
+    ring_protocol = std::make_unique<RingConProtocol>(hidapi_handle);
     rumble_protocol = std::make_unique<RumbleProtocol>(hidapi_handle);
 
     // Get fixed joycon info
@@ -172,9 +179,23 @@ void JoyconDriver::OnNewData(std::span<u8> buffer) {
         .accelerometer_sensitivity = accelerometer_sensitivity,
     };
 
+    // TODO: Remove this when calibration is properly loaded and not calculated
+    if (ring_connected && report_mode == InputReport::STANDARD_FULL_60HZ) {
+        InputReportActive data{};
+        memcpy(&data, buffer.data(), sizeof(InputReportActive));
+        calibration_protocol->GetRingCalibration(ring_calibration, data.ring_input);
+    }
+
+    const RingStatus ring_status{
+        .is_enabled = ring_connected,
+        .default_value = ring_calibration.default_value,
+        .max_value = ring_calibration.max_value,
+        .min_value = ring_calibration.min_value,
+    };
+
     switch (report_mode) {
     case InputReport::STANDARD_FULL_60HZ:
-        joycon_poller->ReadActiveMode(buffer, motion_status);
+        joycon_poller->ReadActiveMode(buffer, motion_status, ring_status);
         break;
     case InputReport::NFC_IR_MODE_60HZ:
         joycon_poller->ReadNfcIRMode(buffer, motion_status);
@@ -204,6 +225,26 @@ void JoyconDriver::SetPollingMode() {
         generic_protocol->EnableImu(false);
     }
 
+    if (ring_protocol->IsEnabled()) {
+        ring_connected = false;
+        ring_protocol->DisableRingCon();
+    }
+
+    if (hidbus_enabled && supported_features.hidbus) {
+        auto result = ring_protocol->EnableRingCon();
+        if (result == DriverResult::Success) {
+            result = ring_protocol->StartRingconPolling();
+        }
+        if (result == DriverResult::Success) {
+            ring_connected = true;
+            disable_input_thread = false;
+            return;
+        }
+        ring_connected = false;
+        ring_protocol->DisableRingCon();
+        LOG_ERROR(Input, "Error enabling Ringcon");
+    }
+
     if (passive_enabled && supported_features.passive) {
         const auto result = generic_protocol->EnablePassiveMode();
         if (result == DriverResult::Success) {
diff --git a/src/input_common/helpers/joycon_driver.h b/src/input_common/helpers/joycon_driver.h
index 48ba859f4..dc5d60221 100644
--- a/src/input_common/helpers/joycon_driver.h
+++ b/src/input_common/helpers/joycon_driver.h
@@ -12,6 +12,7 @@
 #include "input_common/helpers/joycon_protocol/generic_functions.h"
 #include "input_common/helpers/joycon_protocol/joycon_types.h"
 #include "input_common/helpers/joycon_protocol/poller.h"
+#include "input_common/helpers/joycon_protocol/ringcon.h"
 #include "input_common/helpers/joycon_protocol/rumble.h"
 
 namespace InputCommon::Joycon {
@@ -86,6 +87,7 @@ private:
     std::unique_ptr<CalibrationProtocol> calibration_protocol = nullptr;
     std::unique_ptr<GenericProtocol> generic_protocol = nullptr;
     std::unique_ptr<JoyconPoller> joycon_poller = nullptr;
+    std::unique_ptr<RingConProtocol> ring_protocol = nullptr;
     std::unique_ptr<RumbleProtocol> rumble_protocol = nullptr;
 
     // Connection status
@@ -118,6 +120,7 @@ private:
     JoyStickCalibration left_stick_calibration{};
     JoyStickCalibration right_stick_calibration{};
     MotionCalibration motion_calibration{};
+    RingCalibration ring_calibration{};
 
     // Fixed joycon info
     FirmwareVersion version{};
diff --git a/src/input_common/helpers/joycon_protocol/calibration.cpp b/src/input_common/helpers/joycon_protocol/calibration.cpp
index 5c29af545..ce1ff7061 100644
--- a/src/input_common/helpers/joycon_protocol/calibration.cpp
+++ b/src/input_common/helpers/joycon_protocol/calibration.cpp
@@ -128,6 +128,28 @@ DriverResult CalibrationProtocol::GetImuCalibration(MotionCalibration& calibrati
     return result;
 }
 
+DriverResult CalibrationProtocol::GetRingCalibration(RingCalibration& calibration,
+                                                     s16 current_value) {
+    // TODO: Get default calibration form ring itself
+    if (ring_data_max == 0 && ring_data_min == 0) {
+        ring_data_max = current_value + 800;
+        ring_data_min = current_value - 800;
+        ring_data_default = current_value;
+    }
+    if (ring_data_max < current_value) {
+        ring_data_max = current_value;
+    }
+    if (ring_data_min > current_value) {
+        ring_data_min = current_value;
+    }
+    calibration = {
+        .default_value = ring_data_default,
+        .max_value = ring_data_max,
+        .min_value = ring_data_min,
+    };
+    return DriverResult::Success;
+}
+
 void CalibrationProtocol::ValidateCalibration(JoyStickCalibration& calibration) {
     constexpr u16 DefaultStickCenter{2048};
     constexpr u16 DefaultStickRange{1740};
diff --git a/src/input_common/helpers/joycon_protocol/calibration.h b/src/input_common/helpers/joycon_protocol/calibration.h
index 38214eed4..32ddef4b8 100644
--- a/src/input_common/helpers/joycon_protocol/calibration.h
+++ b/src/input_common/helpers/joycon_protocol/calibration.h
@@ -46,9 +46,19 @@ public:
      */
     DriverResult GetImuCalibration(MotionCalibration& calibration);
 
+    /**
+     * Calculates on run time the proper calibration of the ring controller
+     * @returns RingCalibration of the ring sensor
+     */
+    DriverResult GetRingCalibration(RingCalibration& calibration, s16 current_value);
+
 private:
     void ValidateCalibration(JoyStickCalibration& calibration);
     void ValidateCalibration(MotionCalibration& calibration);
+
+    s16 ring_data_max = 0;
+    s16 ring_data_default = 0;
+    s16 ring_data_min = 0;
 };
 
 } // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/poller.cpp b/src/input_common/helpers/joycon_protocol/poller.cpp
index 341479c0c..cb76e1e06 100644
--- a/src/input_common/helpers/joycon_protocol/poller.cpp
+++ b/src/input_common/helpers/joycon_protocol/poller.cpp
@@ -16,7 +16,8 @@ void JoyconPoller::SetCallbacks(const Joycon::JoyconCallbacks& callbacks_) {
     callbacks = std::move(callbacks_);
 }
 
-void JoyconPoller::ReadActiveMode(std::span<u8> buffer, const MotionStatus& motion_status) {
+void JoyconPoller::ReadActiveMode(std::span<u8> buffer, const MotionStatus& motion_status,
+                                  const RingStatus& ring_status) {
     InputReportActive data{};
     memcpy(&data, buffer.data(), sizeof(InputReportActive));
 
@@ -36,6 +37,10 @@ void JoyconPoller::ReadActiveMode(std::span<u8> buffer, const MotionStatus& moti
         break;
     }
 
+    if (ring_status.is_enabled) {
+        UpdateRing(data.ring_input, ring_status);
+    }
+
     callbacks.on_battery_data(data.battery_status);
 }
 
@@ -62,13 +67,26 @@ void JoyconPoller::ReadPassiveMode(std::span<u8> buffer) {
 
 void JoyconPoller::ReadNfcIRMode(std::span<u8> buffer, const MotionStatus& motion_status) {
     // This mode is compatible with the active mode
-    ReadActiveMode(buffer, motion_status);
+    ReadActiveMode(buffer, motion_status, {});
 }
 
 void JoyconPoller::UpdateColor(const Color& color) {
     callbacks.on_color_data(color);
 }
 
+void JoyconPoller::UpdateRing(s16 value, const RingStatus& ring_status) {
+    float normalized_value = static_cast<float>(value - ring_status.default_value);
+    if (normalized_value > 0) {
+        normalized_value = normalized_value /
+                           static_cast<float>(ring_status.max_value - ring_status.default_value);
+    }
+    if (normalized_value < 0) {
+        normalized_value = normalized_value /
+                           static_cast<float>(ring_status.default_value - ring_status.min_value);
+    }
+    callbacks.on_ring_data(normalized_value);
+}
+
 void JoyconPoller::UpdateActiveLeftPadInput(const InputReportActive& input,
                                             const MotionStatus& motion_status) {
     static constexpr std::array<Joycon::PadButton, 11> left_buttons{
diff --git a/src/input_common/helpers/joycon_protocol/poller.h b/src/input_common/helpers/joycon_protocol/poller.h
index fff681d0a..68b14b8ba 100644
--- a/src/input_common/helpers/joycon_protocol/poller.h
+++ b/src/input_common/helpers/joycon_protocol/poller.h
@@ -28,12 +28,14 @@ public:
     void ReadPassiveMode(std::span<u8> buffer);
 
     /// Handles data from active packages
-    void ReadActiveMode(std::span<u8> buffer, const MotionStatus& motion_status);
+    void ReadActiveMode(std::span<u8> buffer, const MotionStatus& motion_status,
+                        const RingStatus& ring_status);
 
     /// Handles data from nfc or ir packages
     void ReadNfcIRMode(std::span<u8> buffer, const MotionStatus& motion_status);
 
     void UpdateColor(const Color& color);
+    void UpdateRing(s16 value, const RingStatus& ring_status);
 
 private:
     void UpdateActiveLeftPadInput(const InputReportActive& input,
diff --git a/src/input_common/helpers/joycon_protocol/ringcon.cpp b/src/input_common/helpers/joycon_protocol/ringcon.cpp
new file mode 100644
index 000000000..2d137b85d
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/ringcon.cpp
@@ -0,0 +1,132 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "common/logging/log.h"
+#include "input_common/helpers/joycon_protocol/ringcon.h"
+
+namespace InputCommon::Joycon {
+
+RingConProtocol::RingConProtocol(std::shared_ptr<JoyconHandle> handle)
+    : JoyconCommonProtocol(handle) {}
+
+DriverResult RingConProtocol::EnableRingCon() {
+    LOG_DEBUG(Input, "Enable Ringcon");
+    DriverResult result{DriverResult::Success};
+    SetBlocking();
+
+    if (result == DriverResult::Success) {
+        result = SetReportMode(ReportMode::STANDARD_FULL_60HZ);
+    }
+    if (result == DriverResult::Success) {
+        result = EnableMCU(true);
+    }
+    if (result == DriverResult::Success) {
+        const MCUConfig config{
+            .command = MCUCommand::ConfigureMCU,
+            .sub_command = MCUSubCommand::SetDeviceMode,
+            .mode = MCUMode::Standby,
+            .crc = {},
+        };
+        result = ConfigureMCU(config);
+    }
+
+    SetNonBlocking();
+    return result;
+}
+
+DriverResult RingConProtocol::DisableRingCon() {
+    LOG_DEBUG(Input, "Disable RingCon");
+    DriverResult result{DriverResult::Success};
+    SetBlocking();
+
+    if (result == DriverResult::Success) {
+        result = EnableMCU(false);
+    }
+
+    is_enabled = false;
+
+    SetNonBlocking();
+    return result;
+}
+
+DriverResult RingConProtocol::StartRingconPolling() {
+    LOG_DEBUG(Input, "Enable Ringcon");
+    bool is_connected = false;
+    DriverResult result{DriverResult::Success};
+    SetBlocking();
+
+    if (result == DriverResult::Success) {
+        result = WaitSetMCUMode(ReportMode::STANDARD_FULL_60HZ, MCUMode::Standby);
+    }
+    if (result == DriverResult::Success) {
+        result = IsRingConnected(is_connected);
+    }
+    if (result == DriverResult::Success && is_connected) {
+        LOG_INFO(Input, "Ringcon detected");
+        result = ConfigureRing();
+    }
+    if (result == DriverResult::Success) {
+        is_enabled = true;
+    }
+
+    SetNonBlocking();
+    return result;
+}
+
+DriverResult RingConProtocol::IsRingConnected(bool& is_connected) {
+    LOG_DEBUG(Input, "IsRingConnected");
+    constexpr std::size_t max_tries = 28;
+    std::vector<u8> output;
+    std::size_t tries = 0;
+    is_connected = false;
+
+    do {
+        std::vector<u8> empty_data(0);
+        const auto result = SendSubCommand(SubCommand::UNKNOWN_RINGCON, empty_data, output);
+
+        if (result != DriverResult::Success) {
+            return result;
+        }
+
+        if (tries++ >= max_tries) {
+            return DriverResult::NoDeviceDetected;
+        }
+    } while (output[14] != 0x59 || output[16] != 0x20);
+
+    is_connected = true;
+    return DriverResult::Success;
+}
+
+DriverResult RingConProtocol::ConfigureRing() {
+    LOG_DEBUG(Input, "ConfigureRing");
+    constexpr std::size_t max_tries = 28;
+    DriverResult result{DriverResult::Success};
+    std::vector<u8> output;
+    std::size_t tries = 0;
+
+    do {
+        std::vector<u8> ring_config{0x06, 0x03, 0x25, 0x06, 0x00, 0x00, 0x00, 0x00, 0x1C, 0x16,
+                                    0xED, 0x34, 0x36, 0x00, 0x00, 0x00, 0x0A, 0x64, 0x0B, 0xE6,
+                                    0xA9, 0x22, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                    0x00, 0x00, 0x90, 0xA8, 0xE1, 0x34, 0x36};
+        result = SendSubCommand(SubCommand::UNKNOWN_RINGCON3, ring_config, output);
+
+        if (result != DriverResult::Success) {
+            return result;
+        }
+        if (tries++ >= max_tries) {
+            return DriverResult::NoDeviceDetected;
+        }
+    } while (output[14] != 0x5C);
+
+    std::vector<u8> ringcon_data{0x04, 0x01, 0x01, 0x02};
+    result = SendSubCommand(SubCommand::UNKNOWN_RINGCON2, ringcon_data, output);
+
+    return result;
+}
+
+bool RingConProtocol::IsEnabled() {
+    return is_enabled;
+}
+
+} // namespace InputCommon::Joycon
diff --git a/src/input_common/helpers/joycon_protocol/ringcon.h b/src/input_common/helpers/joycon_protocol/ringcon.h
new file mode 100644
index 000000000..0c25de23e
--- /dev/null
+++ b/src/input_common/helpers/joycon_protocol/ringcon.h
@@ -0,0 +1,38 @@
+// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+// Based on dkms-hid-nintendo implementation, CTCaer joycon toolkit and dekuNukem reverse
+// engineering https://github.com/nicman23/dkms-hid-nintendo/blob/master/src/hid-nintendo.c
+// https://github.com/CTCaer/jc_toolkit
+// https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
+
+#pragma once
+
+#include <vector>
+
+#include "input_common/helpers/joycon_protocol/common_protocol.h"
+#include "input_common/helpers/joycon_protocol/joycon_types.h"
+
+namespace InputCommon::Joycon {
+
+class RingConProtocol final : private JoyconCommonProtocol {
+public:
+    RingConProtocol(std::shared_ptr<JoyconHandle> handle);
+
+    DriverResult EnableRingCon();
+
+    DriverResult DisableRingCon();
+
+    DriverResult StartRingconPolling();
+
+    bool IsEnabled();
+
+private:
+    DriverResult IsRingConnected(bool& is_connected);
+
+    DriverResult ConfigureRing();
+
+    bool is_enabled{};
+};
+
+} // namespace InputCommon::Joycon